Out of stock
Toothpick F722 2-6S AIO Brushless FC 35A (BLHeli_S) ICM42688 By BetaFPV
Item can be returned in its original condition for a full refund within 30 days of receipt
This product has been verified to be delivered safely in its original packaging, box or bag, reducing unnecessary packaging. For purchases over EUR 50, we offer the option of FREE delivery to your home!
103.90€
Ex Tax: 85.16€
The brand new F722 2-6S AIO 35A FC by BETAFPV is a very reliable flight controller that is made to meet your advanced FPV needs.
Comes with an F722 chip, a ICM42688 gyro and BLHELI_S ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
Bullet Points
- Better performance capability and higher calculation speed for more stable and smoother flight.
- Has specially added 6-pin connector for DJI Digital VTX.
- 6 full UARTs for more options for external parts like VTX, GPS, Receiver and other components.
- More stable voltage and current
- Can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery for a stronger flight performance.
Recommended Parts (not included)
- BNF: highly recommend for TWIG ET5 and X-Knight 5"" Toothpick Quad
- Battery: 550mAh 6S 75C battery, 450mAh 4S battery, 4S 1000mAh Battery
- VTX: M02 25-350mW 5.8G VTX, A02 25-800mW 5.8G VTX
- Motor: 1805 1550KV brushless motor, 2004 Brushless Motors, 1606 Brushless Motor, 1506 Brushless Motor
- Compatible Propellers: Gemfan 5125 3-Blade props and Gemfan 5020 props
- Frame: 4-5 inch Frame, highly recommend for TWIG ET5 5"" Toothpick Frame, X-Knight Carbon Fiber 5"" V2 Frame Kit and X-knight 5"" frame
FC Specifications
- Item: F722 35A AIO FC(BLHeli_S)
- Weight: 7.06g
- CPU: STM32F722RET6
- Six-Axis: ICM42688 (SPI connection)
- Mounting hole size: 26mm * 26mm
- Firmware version: betaflight_4.2.x_BETAFPVF722
- OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
- Support programmable LED like WS2812 etc
- Built-in current sensor
ESC Specifications
- Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
- Input voltage: 2S-6S Lipo
- Continuous current: 35A
- Peak current: 40A
- ESC firmware: BLHELI_S
- Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
- Capacitance: CS|5*10*13mm|470μF|35V
- Connecter: 80mm 14AWG silicone cable with XT60
- Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
Included
- 1x Toothpick F722 35A AIO 2-6S brushless flight controller
- 1x Cable Pigtail (XT60U)
- 1x Capacitor
- 1x 6-Pin Connector for DJI Digital VTX
- 4x M2x10mm Screws
- 8x M2 Nuts