-250x250w.png "DJI Mini 3 PRO (DJI RC)")
-250x250w.png "DJI Mini 3 PRO")
-1000x1000-150x150.jpg)
Stock at supplier
Stock at supplier
Stock at supplier
Brand: APD
Model: APD-40-F3
The APD F-Series ESCs bring forward a ground-breaking new design utilizing a Powerful 32bit F3 running brand-new firmware developed from the ground up.Product DescriptionThe F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include ..
29.83€
Ex Tax:24.45€
Stock at supplier
Stock at supplier
Brand: APD
Model: APD-120A
Product DescriptionThe F3 processor ensures no input commands are missed, even at the highest input update rates. Its bleeding-edge features include PWM-frequency dithering, and Active Phase-current Demagnetisation to ensure the smoothest control at high power, whilst maintaining maximum efficiency...
89.90€
Ex Tax:73.69€
Stock at supplier
Brand: OneDrone
Model: TEKKO32F3-METAL
SPEC:F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108MhzThe 4in1 has onboard analog current sensor, and TLM function(then no current reading over TLM)Using metal case mosfet for better Heat dissipationSupports Lipo 4-6SExt. cap needed for 6s (470uf 35v for 6s usage.)Size:42 x 42 mmMount..
78.90€
Ex Tax:64.67€
Stock at supplier
Brand: OneDrone
Model: AIKON-AK32-4IN1-V2
Bullet PointHigh Quality MOSFET up to 40VHigh stability @ 6S lipoBec 5v@2ACurrent SensorTelemetrySpecificationsSTM32F051 micro-processor with the last BLHELI32 FirmWareInput 3-6SConstant output current: 35A, Burst 45A in 10sBEC: 5V / 2ASize : 37 * 45 * 6mmWeight : 14,3g..
62.90€
Ex Tax:51.56€
Out Of Stock
Brand: iFlight
Model: FC07272
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro US..
114.90€
Ex Tax:94.18€
Stock at supplier
Brand: Flyduino
Model: KISS-4in1
With a maximum short-term current output of up to 160A (4 x 40A), sufficient reserves of power are available for future motors.As usual, the controller transmitsall important telemetry data such as voltage, current, temperature or speed via the TLM line. These can then be displayed via an OSD or in ..
84.90€
Ex Tax:69.59€
Stock at supplier
Brand: Zeez Design
Model: ZEEZ-60A-ESC
FeaturesInput: 3S-6SHigh quality Toshiba Mosfet: 60A continuous current draw /90A peak currentFirmware: BlHeli32 ZEEZ60AAluminum HeatSink to cooldown the Mosfet.Including 35V 470uF Low ESR Capacitor (and spare capacitor)Easy wiring with connector included in package with Zeez F7 Flight ControllerBid..
59.90€
Ex Tax:49.10€
Stock at supplier
Brand: T-Motor
Model: F-PRO
Included in the combo4x F60 Pro III 1750kv1x ESC 4in 1 F55 PROII1x Spare bell4x Motor Shield1x battery strap1x extensible sheath1x Sticker1x Lucky card (usable on T-Motor products)..
139.90€
Ex Tax:114.67€
Stock at supplier
Brand: Spedix
Model: SPX-7107X
This compromise made these ESCs vulnerable to the ever-growing demand of heat sinking capabilities and current/voltage tolerance of the FPV market. With our innovative design, by separating the control board and the power board, we successfully implemented full-size 5*6mm MOSFET onto this 20*20mm ES..
51.90€
Ex Tax:42.54€