Menu
Your Cart

Flight Controllers

ProfiCNC/HEX The Cube Orange +
Out of stock
Brand: ProfiCNC/HEX Model: HX-COR+
CubePilot- The Cube Orange + (Beta Version) Features 1. Faster H7 SOC with 1MB ram. 2. Upgraded triple redundant IMU sensors for extra redundancy. 3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation. 4. IMUs are temperature-controlled b..
249.90€
Ex Tax:204.84€
Brand: ProfiCNC/HEX Model: HX-COR+-SET
CubePilot- The Cube Orange + (Beta Version) Set with ADSB carrier board Features 1. Faster H7 SOC with 1MB ram. 2. Upgraded triple redundant IMU sensors for extra redundancy. 3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation. 4. IMUs ..
409.90€
Ex Tax:335.98€
ProfiCNC/HEX The Cube Blue H7 - USA ITAR edition
Out of stock
Brand: ProfiCNC/HEX Model: HX-CBLU-H7
Profi CNC/HEX Blue Cube H7 is made in the USA in an ITAR certified Factory in Fremond, CA. This edition is aimed at military and government. Product DescriptionThe cube can be used with a range of carrier boards such as the Standard, mini or Kore. 2x CAN (pins reserved for a 3rd Can bus)2x I2C5..
599.90€
Ex Tax:491.72€
Brand: ProfiCNC/HEX Model: HX-CORE
FEATURES AT-A-GLANCEUp to 12-cell Lithium battery (50.4V)140A continuous current with 280A surgesPower and signal for ESCs conveniently located in corners12V navigation light power available at each cornerBuilt-in power distributionBuilt-in voltage and current senseRedundant power supplies for fligh..
349.90€
Ex Tax:286.80€
Brand: ProfiCNC/HEX Model: HX-MCB
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller size and almost the same capability with Pixhawk 2.1 standard carrier board, it can better fit-in to those applications which have size limits. Also, it..
109.90€
Ex Tax:90.08€
Brand: DJI Model: a3pro
A3 PRO Flight controlet - Triple Modular Redundancy The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight..
2,061.90€
Ex Tax:1,690.08€
Model: zeros4
Zero UAV YS S4 V2 Multi-rotor IMU Flight Controller Offical Version w/GPS Navigation System Features: A. Excellent outlook material Use full metal shell, precise cutting process brings new experience B. Lighter, smaller control module Small size, light weight, decrease copters weight, very easy to ..
149.90€
Ex Tax:122.87€
Model: navictrl20
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass. In together with a MKGPS the navigational capabilities of the Mikrokopter are expanded. (e.g. waypoint navigation, position hold ,...) The board is already SMD preassembled, there are only a few compone..
60.90€
Ex Tax:49.92€
Brand: ProfiCNC/HEX Model: HX-SCREW
Pack of 10 screws for mountig the Cube...
2.90€
Ex Tax:2.38€
Model: navi21
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass (you don`t need an MK3Mag for this Navi) .In combination with a MKGPS, MikroKopter can navigate via GPS (e.g. waypoint navigation, position hold, coming home,...)The board is already assembled.The NaviCtrl..
120.90€
Ex Tax:99.10€
Model: navi21lic
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and integrated compass (you don`t need an MK3Mag for this Navi) .In combination with a MKGPS, MikroKopter can navigate via GPS (e.g. waypoint navigation, position hold, coming home,...)The board is already assembled.The NaviCtrl..
1,320.90€
Ex Tax:1,082.70€
Brand: ProfiCNC/HEX Model: HX-CBL-P
Prifu CNC/HEX Cube Mini – No Carrier Board included INSIDE THE CUBE  An STM32F427 Rev 3 Flight management unit. (where the flight controller lives.)An STM32F100 I/O processor with pass through capabilities for failsafe. (deals with the Receiver and outputs ) IMU"s1 Fixed 10 Axis IMU on the main Main..
179.90€
Ex Tax:147.46€
Showing 1 to 12 of 12 (1 Pages)