![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-043
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with JST-GH 6p connector.
For example:
Pixhawk 3, PixRacer... etc.
L = 150mm ..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-052
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery time for..
240.90€
Ex Tax:197.46€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
15.90€
Ex Tax:13.03€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Connex
Model: con-mini
Additional ground end / receiver for Amimon Connex Mini. .In the Box:
Ground Unit (receiver)
Antennas and cables
Amimon"s CONNEX provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!Th..
1,403.90€
Ex Tax:1,150.74€
Model: ins-lef-arm
Inspire 1 auxiliary LEFT arm component PART 11..
23.90€
Ex Tax:19.59€
Model: SKU007
Adicam Extra Bracket
Accessory crossbar dedicated to steadicam operators to hang the vest.
Our system is configured to be mounted on the narrow side of the cart, opposite to the swivel wheels. Extra bracket can be mount without removing the top shelf.
Our set includes:
1× extra bracket..
73.90€
Ex Tax:60.57€
Model: FF-RED-RCP
This cable allows users to gain access to RED’s Redlink Command Protocol via the ‘CTRL’ port on RED cameras. This allows users to control functions like ISO, Frame Rate, Color temp, and Focus and aperture on EF lenses all from up to 600+ feet away using the MÅVI Controller and MIMIC controller. T..
218.90€
Ex Tax:179.43€
Model: FF-LE-MO-CA
This lens cable features custom cable which is ultra thin and flexible for the most difficult camera installations where wire routing is challenging. It features a Molex Microfit connector on one end, and a LEMO 1B 7 Pin on the other end. With 3 of these cables users will be able to control 3 moto..
218.90€
Ex Tax:179.43€
Model: FF-RED-DT
This cable allows users to power their RED Epic/Weapon/Scarlet from the MÅVI Pro’s camera power port. The cable features a custom thin and flexible cable with high quality connectors. Users will enjoy the convenience of unlimited up-time with this setup by utilizing the battery hot-swap capabilit..
279.90€
Ex Tax:229.43€
Model: FF-ARRI
Power your ALEXA Mini via D-tap with a high-strand count, silicon-wrapped wire for maximum durability and flexibility.
Features
Connector A: LEMO 2B 8 Pin
Connector B: D-Tap
Custom high flex, lightweight cable
250mm (9.8in) cable length..
279.90€
Ex Tax:229.43€
Model: MOVI-PRO-FRX
This cable allows users to connect their MÅVI Controller Receiver to the MÅVI Pro. This allows users full control of MÅVI Pro pointing, FIZ, and RED RCP (Camera Controls) from up to 1000 ft away. This Cable is included with the MÅVI Pro.
Features
High flex, lightweight cable
Locking GH connec..
7.90€
Ex Tax:6.48€