![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm
To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector.
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Model: alexamp2
Silicon Soft Power cable for Alexa Mini - lenght 1m.
Original connector is D-tap, but we can install some other connector too...
108.90€
Ex Tax:89.26€
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Ex Tax:20.41€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Model: 802890t
iPower GBM8028-90T
Features:
-Sealed Case to prevent contamination by dust and dirty. -Hollow shaft for slipring -Configuration:36N42P,prove more torque. Specs: -Copper wire (OD):0.20mm Pre-wound with 90 turns. -Internal Resistance:19.3 ohms -Motor Can Dimension:90mm(OD) x 28mm(Height) -Stator D..
194.90€
Ex Tax:159.75€
Brand: DJI
Model: lighcablepack
DJI 2.4GHz Full HD Lightbridge Downlink Part 09 Accessory Pack (AV Cable and CAN-Bus Power Cables)..
12.90€
Ex Tax:10.57€
Model: redcable
Description
This custom 90 degree power connector for the RED Scarlet, Epic, Dragon, Weapon is unique in that it allows you to 90 out to the right of the camera instead of straight down. The benefit of this connector is that you can bring the camera as far to the roll cage as possible without the ..
99.90€
Ex Tax:81.89€
Model: DC-PP-21
2.1mm DC Power Plug with 15cm Lead for powering RX, TX, LCD, ...Specs:Internal Diameter: 2.1mmExternal Diameter: 5.5mmPlug Length: 11mmOverall length: 40mmWire: Red/Black 150mmMax rating: 1amp @ 12VQuantity: 1pcs..
3.90€
Ex Tax:3.20€
Brand: Gremsy
Model: GR-H3-3S
gPower 3S - 3400mAh Battery is used to power the Gremsy H3. Each battery will run the Gremsy H3 for 3-8 hours depending on the particular setup. The battery can be charged using the gPower charger included in the H3 package...
59.90€
Ex Tax:49.10€
Model: gbm6212
iPower GBM6212H-150T Hollow Shaft Sealed case
The GBM62 series motor by iPower Motors are the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII,MARKIII Cameras.This motor is designed for large scale
multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.The princi..
86.90€
Ex Tax:71.23€