![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: AA-PC90
Extra Soft Power cable for Alexa Mini - lenght 50 cm, specially made for gimbals.
Original connector is XT60, but we can install some other connector too...
133.90€
Ex Tax:109.75€
Brand: Mauch Electronic
Model: MAU2-052
Input voltage 3-20S, max. 85V !
Power-Cube 2 / V2 with 2 outputs 2x 5.3V / 10A.
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2 -> Output 1 can"t be changed and must remain 5.3V.
Delivery time for..
240.90€
Ex Tax:197.46€
Brand: Mauch Electronic
Model: MAU2-051
Input voltage 3-20S, max. 85V !
Power-Cube 1 / V2 with 1 output 5.3V / 10A.
Scope of delivery:
1x Power-Cube 1 with CFK enclosure and fan.
1x (040) PL sensor cable / L = 150mm
1X (060) Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6p / L = 200mm ..
169.90€
Ex Tax:139.26€
Model: FF-RED-DT
This cable allows users to power their RED Epic/Weapon/Scarlet from the MÅVI Pro’s camera power port. The cable features a custom thin and flexible cable with high quality connectors. Users will enjoy the convenience of unlimited up-time with this setup by utilizing the battery hot-swap capabilit..
279.90€
Ex Tax:229.43€
Model: FF-ARRI
Power your ALEXA Mini via D-tap with a high-strand count, silicon-wrapped wire for maximum durability and flexibility.
Features
Connector A: LEMO 2B 8 Pin
Connector B: D-Tap
Custom high flex, lightweight cable
250mm (9.8in) cable length..
279.90€
Ex Tax:229.43€
Brand: DJI
Model: DJI-P4-10P
The DJI Battery (10 PIN-A) to DC Power Cable is used to connect a DJI device with a DC port and the Phantom 4 Intelligent Flight Battery (model PH4-5350mAh-15.2V) as a power supply for the DJI device...
7.90€
Ex Tax:6.48€
Model: movi-pro-dc
This Cable allows users to power their Connex wireless system from one of the accessory ports on the MÅVI Pro. It allows seamless integration and powering of the Connex wireless system onto either the pan bars or tilt cage.
Features
High flex, lightweight cable
D-Tap Connector
Locking GH connec..
33.90€
Ex Tax:27.79€
Model: DJI-MA-BP
The Mavic Battery to Power Bank Adaptor is designed to provide power from the Mavic Intelligent Flight Battery to mobile devices such as smart phones or tablets or charge Mavic remote...
21.90€
Ex Tax:17.95€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
8.90€
Ex Tax:7.30€
Model: MAU2-109
This cable connects the P-C current sensor to any Power-Cube.
Inclusive 2 resistors to modify the voltage sense wire to an higher LiPo voltage (60V or 90V)
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€