![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Ex Tax:20.41€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Model: kw12motor25
Motor mount for single or coaxial setup for KW12 motors to fit on 25mm booms or cinestars.Made from 3K carbon 2,5mm.
Delivery:2 pieces (top-bottom motor)8 piecs hexa 8mm screws for motor..
19.90€
Ex Tax:16.31€
Model: relyswitch1
A nice little relay switch controlled by a spare auxiliary channel on your receiver.
Ideal for switching lights, sound and any other auxiliary electrical items.Spec:Dimensions: 31x18.5x16.3mmRX lead leingth:230mmPower in/out lead leingth:40mm (each)Max switching load (DC):2AMax Voltage (DC):30VMax s..
9.90€
Ex Tax:8.11€
Model: elecswitch4c
This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and ..
12.90€
Ex Tax:10.57€
Model: phantpultnolcd
First Profi FPV pult for all Phantoms without LCD holder.
U can reach poti for tilt and batteries on the bottom...
84.90€
Ex Tax:69.59€
Model: 802890t
iPower GBM8028-90T
Features:
-Sealed Case to prevent contamination by dust and dirty. -Hollow shaft for slipring -Configuration:36N42P,prove more torque. Specs: -Copper wire (OD):0.20mm Pre-wound with 90 turns. -Internal Resistance:19.3 ohms -Motor Can Dimension:90mm(OD) x 28mm(Height) -Stator D..
194.90€
Ex Tax:159.75€
Model: tod
Toad In The Hole Quick Release V2, stronger and with safety ring.
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi. It allows the operator to remove the Movi from the handle assembly and atta..
347.90€
Ex Tax:285.16€