![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: nazav2p
Naza V2 Phantom edition..
42.90€
Ex Tax:35.16€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
15.90€
Ex Tax:13.03€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Connex
Model: con-mini
Additional ground end / receiver for Amimon Connex Mini. .In the Box:
Ground Unit (receiver)
Antennas and cables
Amimon"s CONNEX provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!Th..
1,403.90€
Ex Tax:1,150.74€
Model: mav-prop
Spare Mavic - 8330 Quick-release Folding Propellers..
9.90€
Ex Tax:8.11€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€
Model: FF-RED-RCP
This cable allows users to gain access to RED’s Redlink Command Protocol via the ‘CTRL’ port on RED cameras. This allows users to control functions like ISO, Frame Rate, Color temp, and Focus and aperture on EF lenses all from up to 600+ feet away using the MÅVI Controller and MIMIC controller. T..
218.90€
Ex Tax:179.43€
Model: FF-LE-MO-CA
This lens cable features custom cable which is ultra thin and flexible for the most difficult camera installations where wire routing is challenging. It features a Molex Microfit connector on one end, and a LEMO 1B 7 Pin on the other end. With 3 of these cables users will be able to control 3 moto..
218.90€
Ex Tax:179.43€
Model: mavic-usb
Mavic - RC Cable (Standard Micro USB connector)..
9.90€
Ex Tax:8.11€
Model: FF-TO-ST
Quickly mount your MÅVI to a C-stand using the ‘Toad on a Stick’ adapter. This allows users to utilize a C-stand for time lapse shots, tripod shots, and the ability to utilize a C-stand for MÅVI prep.
Features:
Quick release clamp lever
Standard Toad mount to interface with Freefly’s Toad in th..
113.90€
Ex Tax:93.36€
Model: FF-13MM
Quickly mount a variety of small accessories to the MÅVI Ring, MÅVI Pro Classic Handle, Low Profile Handle, MÅVI Controller, and Mimic Handlebars using Freefly’s 13mm Monitor / Accy mount. This quick release mount allows users to mount monitors, wireless transmitters, and other accessories to ou..
30.90€
Ex Tax:25.33€