![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-043
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with JST-GH 6p connector.
For example:
Pixhawk 3, PixRacer... etc.
L = 150mm ..
7.90€
Ex Tax:6.48€
Model: ronp21
Part 21. DJI Ronin Hook and Loop Straps (3pcs)..
9.90€
Ex Tax:8.11€
Brand: DJI
Model: lirecoca
The DJI LightBridge operates in the 2.4 Ghz band to transmit live video back to the ground, so the radio controller has to either work through the LightBridge or has to work on another frequency, these radio cables work with Futaba trainer ports found on the Futaba 14SG Radio Combo with R7008SB Rece..
7.90€
Ex Tax:6.48€
Model: p2pa9
Phantom 2 FPV Cable & Hub Part 9..
12.90€
Ex Tax:10.57€
Model: nazav2p
Naza V2 Phantom edition..
42.90€
Ex Tax:35.16€
Model: aninbo
Anti interference board Zenmuse h3-3d..
15.90€
Ex Tax:13.03€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
15.90€
Ex Tax:13.03€
Brand: T-Motor
Model: u7propadaptccw
NEW unbreakable and the best prop adapter for KW12 / U7 motors, this adapter will not let you down on the field.
6mm shaft.
delivery 1 piece CCW..
7.90€
Ex Tax:6.48€
Brand: T-Motor
Model: u7propadapt
NEW unbreakable and 6mm longer prop adapter for U7 / KW12 motors, this adapter will not let you down on the field. 6mm shaft. Now it fits to all wooden/plastic props.
You can buy this prop adapters only at Kopterworx, exclusive from T-motor.
delivery 1 pair:1x CW + 1x CCW..
14.90€
Ex Tax:12.21€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€