![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: FF-13MM
Quickly mount a variety of small accessories to the MÅVI Ring, MÅVI Pro Classic Handle, Low Profile Handle, MÅVI Controller, and Mimic Handlebars using Freefly’s 13mm Monitor / Accy mount. This quick release mount allows users to mount monitors, wireless transmitters, and other accessories to ou..
30.90€
Ex Tax:25.33€
Model: FF-PL-30
MÅVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 30mm, 25mm, and 15mm carbon tubes. We have created the Pop-N-Lock line of quick release accessories to enable users to quickly set up their rigs with just about ..
119.90€
Ex Tax:98.28€
Model: FF-PL-15
MÅVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 30mm, 25mm, and 15mm carbon tubes. We have created the Pop-N-Lock line of quick release accessories to enable users to quickly set up their rigs with just about ..
119.90€
Ex Tax:98.28€
Model: movi-pro-25
MÅVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 30mm, 25mm, and 15mm carbon tubes. We have created the Pop-N-Lock line of quick release accessories to enable users to quickly set up their rigs with just about ..
119.90€
Ex Tax:98.28€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
8.90€
Ex Tax:7.30€
Model: MAU2-109
This cable connects the P-C current sensor to any Power-Cube.
Inclusive 2 resistors to modify the voltage sense wire to an higher LiPo voltage (60V or 90V)
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm
To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector.
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Model: kw12motor25
Motor mount for single or coaxial setup for KW12 motors to fit on 25mm booms or cinestars.Made from 3K carbon 2,5mm.
Delivery:2 pieces (top-bottom motor)8 piecs hexa 8mm screws for motor..
19.90€
Ex Tax:16.31€
Model: laver40
Laver 20mm - M4aluminium 6061-T6 (anodized) Size : 20mm One pair weight: 3.1g..
9.90€
Ex Tax:8.11€
Brand: ImmersionRC
Model: immuhfjrmod
ImmersionRC EzUHF JR module TX
The module to add portability to your setup. Plugs into the back of your remote control (check compatibility below) without all the cabling. A little less power than his big brother, but still plenty for the added convenience.
500mW of EzUHF Power
JR Module, compatib..
84.90€
Ex Tax:69.59€