![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-002
100A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
54.90€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-088
Mauch Standard Line Customized cable from HS-xxx-xx Sensor Board to Pixhawk / APM
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
5.90€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-043
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with JST-GH 6p connector.
For example:
Pixhawk 3, PixRacer... etc.
L = 150mm ..
7.90€
Ex Tax:6.48€
Model: aninbo
Anti interference board Zenmuse h3-3d..
15.90€
Ex Tax:13.03€
Brand: T-Motor
Model: u7propadaptccw
NEW unbreakable and the best prop adapter for KW12 / U7 motors, this adapter will not let you down on the field.
6mm shaft.
delivery 1 piece CCW..
7.90€
Ex Tax:6.48€
Brand: T-Motor
Model: u7propadapt
NEW unbreakable and 6mm longer prop adapter for U7 / KW12 motors, this adapter will not let you down on the field. 6mm shaft. Now it fits to all wooden/plastic props.
You can buy this prop adapters only at Kopterworx, exclusive from T-motor.
delivery 1 pair:1x CW + 1x CCW..
14.90€
Ex Tax:12.21€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Connex
Model: con-mini
Additional ground end / receiver for Amimon Connex Mini. .In the Box:
Ground Unit (receiver)
Antennas and cables
Amimon"s CONNEX provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!Th..
1,403.90€
Ex Tax:1,150.74€
Model: mav-prop
Spare Mavic - 8330 Quick-release Folding Propellers..
9.90€
Ex Tax:8.11€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€
Model: ins-m2m4-esc
Original Inspire 1 PRO Motor with adapter for motors M2 and M4 with ESC included.
DJI Inspire 1 V2.0 / Pro / RAW..
85.90€
Ex Tax:70.41€
Model: ins-m2-m4
Original Inspire 1 PRO Motor with adapter for motors M2 and M4.
DJI Inspire 1 V2.0 / Pro / RAW..
49.90€
Ex Tax:40.90€