![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: DJI-P3-RC
Spare Phantom 3 - Remote Controller (Pro/Adv)..
316.90€
Ex Tax:259.75€
Brand: Mauch Electronic
Model: MAU2-062
Power-Cube / 5.3V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 5.3V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-063
Power-Cube / 12.0V output cable / 1x C-M-6P + 3x JR / 200mm
Power-Cube 12.0V output cable with 3x JR servo connectors.
REM: This cable is standard delivery with Power-Cube 3 and 4 !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-072
50A - Current measurement sensor board, based on Allegro Hall Sensor ACS-50U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power th..
54.90€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-059
This switch connects to any Power-Cube "V3" or 030: 2x 200A PDB and acts like an manual power on/off control.
It isn"t just a "switch". There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.
The switch has already an installed 3D print..
24.90€
Ex Tax:20.41€
Brand: Mauch Electronic
Model: MAU2-050
This cable connects a PL BEC to the Power 2 input on a Pixhawk 2.1.
Molex CLIK-Mate 2.0mm 6p / L = 150mm..
5.90€
Ex Tax:4.84€
Model: kw12motor25
Motor mount for single or coaxial setup for KW12 motors to fit on 25mm booms or cinestars.Made from 3K carbon 2,5mm.
Delivery:2 pieces (top-bottom motor)8 piecs hexa 8mm screws for motor..
19.90€
Ex Tax:16.31€
Model: herkspark
This board elimininate sparks when u connect Herkules board III to lipos...
29.90€
Ex Tax:24.51€
Model: av200brus
The legendary AV200 finally got upgrade with ultimate motors Maxton.
This kit is an optional upgrade that is directly mounted on the AV200 Pro camera mount converting it to a 3 axis brushless system using the Alexmos gimbal stabilizer (to purchase separately).Technical specifications:
Axis number: ..
695.90€
Ex Tax:570.41€
Model: 12v2a
12V charger 2A for 7" FPV LCD 5,8 Almighty Diversity RX built-in battery..
13.90€
Ex Tax:11.39€
Model: alex35
..
85.90€
Ex Tax:70.41€