![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: DJI
Model: DJI-MI3-RAAM
DJI Mini 3 Pro Front Right Aircraft Arm Module..
40.90€
Ex Tax:33.52€
Model: uni mount25mm
This is universal mount / holder for 25mm booms.
You can easy mount:- any TX video link- WKM, Naza or A2 Led- datalink link- ...
Scope of delivery1x boom clamp 255mm pair2x screw M3+nut2x carbon plates..
19.90€
Ex Tax:16.31€
Model: failsafe
The micro failsafe is designed to return the throttle servo to a preset position in the event that radio signal is lost or the receiver battery voltage drops below a factory preset voltage (4.2V). It is recommended that half brakes be programmed as the failsafe position.
Weight (with cord) : 7 Grams..
7.90€
Ex Tax:6.48€
Model: hdmiminiflat
The world lighter and thinner mini flat to Hdmi cable, lenght 50 cm. weigh only few grams...
23.90€
Ex Tax:19.59€
Brand: DJI
Model: DJI-IN2-HR
Overview
Used to mount the DJI Focus Handwheel to the remote controller, enabling a single operator to adjust Zenmuse X5S focus more easily.
In the Box
Inspire 2 - DJI Focus Handwheel Remote Controller Stand ×1
Compatibility
Inspire 2DJI Focus HandwheelDJI Focus Handwheel - Inspire 2 RC CA..
59.90€
Ex Tax:49.10€
Brand: Mauch Electronic
Model: MAU2-040
This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL - Series.
REM: This cable is standard deliverred together with any BEC or Sensor Hub X2-V2 ..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-042
This cable is for the PL 2-6S series BEC"s to connect to Pixhawk 2.1 or any flight controller with Molex / Clik-Mate / 2.0mm / 6p connector.
L = 150mm ..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-041
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with DF13-6p connector.
For example:
Pixhawk 1, APM... etc.
L = 150mm ..
5.90€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
64.90€
Ex Tax:53.20€
Brand: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
67.90€
Ex Tax:55.66€
Brand: Mauch Electronic
Model: MAU2-002
100A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
54.90€
Ex Tax:45.00€