![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
62.90€
Ex Tax:51.56€
Model: JH61302
This Mamba MK4 F722 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 66 ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F722 MINI
MCU: 216MHz STM32..
114.90€
Ex Tax:94.18€
Model: JH61612
This Mamba MK4 F722 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 44 ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F722 MINI
MCU: 216MHz STM32..
111.90€
Ex Tax:91.72€
Model: JH61218
This Mamba F405 Mini F40 BLHeli_S 40A stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The 40A ESC supports Dshot300/600.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F405 Mini
MCU: STM32F405
GYRO: MP..
94.90€
Ex Tax:77.79€
Model: BF14874
FC Specifications
MCU: AT32F435CGU7
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFLIGHT_BLI..
84.90€
Ex Tax:69.59€
Model: GNB15008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1500mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
51.90€
Ex Tax:42.54€
Model: WNPJ-00027
Redbird antennas for Walksnail Avatar Goggles X.
Specifications
Bandwidth : 5600-6000MHz
Polarization : LHCP
Gain : 1.5dBi
VSWR :..
13.90€
Ex Tax:11.39€
Model: WNPJ-00028
Foam for Walksnail Avatar Goggles X.
You have the choice between two foam formats:
- the wide version in PU.
- the small version in polyurethane water.
Included
1x Foam
Voir plus..
10.90€
Ex Tax:8.93€
Model: WN08-6S14B
New version of the Walksnail Avatar HD PRO kit with two antennas for more power!
This kit consisting of the Avatar HD Pro micro camera, the Avatar HD Pro V2 VTX and two antennas will allow you to fly in the most complex conditions thanks to improved transmission performance.
The new VTX with improve..
204.90€
Ex Tax:167.95€
Model: WN01-FP002
Get more power and more stability with this new version of the VTX Avatar HD from Walksnail has two UFL IPEX connectors to connect 2 antennas.
20x20mm and 25x25mm mounting holes are available for wider compatibility.
The VTX Avatar HD V2 32G supports Gyroflow.
It can record your 1080p or 720p HD fli..
146.90€
Ex Tax:120.41€
Model: FOAM-AVATAR-V1
Foam for Walksnail Avatar HD Goggles.
Included
1x Foam
Voir plus..
14.90€
Ex Tax:12.21€
Model: X2AIR-WALKSNAIL-LHCP
TrueRC"s high-efficiency X2-AIR MKII antennas with RP-SMA connectors for Walksnail goggles.
Only the pair of antennas is included, add a pair of CORE antennas to that for the perfect combo.
Specifications
Bandwidth: 5.1GHz-7.0GHz
Gain: 13 dBic
Polarization: LHCP
Beam-width Horizontal*: 150deg
B..
115.90€
Ex Tax:95.00€