Search Criteria
Products meeting the search criteria
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Ex Tax:13.03€
Model: JH61610
This Mamba F405 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 44 ESC supports a 3-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F405 Mini
MCU: STM32F405
GYRO:..
99.90€
Ex Tax:81.89€
Model: AXIS-C246-1850KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 1850KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Ex Tax:22.05€
Model: M9N-5883
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrent..
57.90€
Ex Tax:47.46€
Model: GNB13008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1300mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
50.90€
Ex Tax:41.72€
Model: TAA13008S13X6
Tattu R-Line Version 5.0 1050mAh 14.8V 150C 8S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be..
51.90€
Ex Tax:42.54€
Model: GNB11008S120AHV
Gaoneng GNB HV batteries are light and powerful, the best possible ratio to optimize the capabilities of your drone.
This 8S 1100mAh battery has an XT60 connector.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be used with care, particularly when charging and discharg..
43.90€
Ex Tax:35.98€
Model: TAA10508S15X6
Tattu R-Line Version 5.0 1050mAh 14.8V 150C 8S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be..
48.90€
Ex Tax:40.08€
Model: MD010703
Hisingy"s powerful Matrix motor was designed for high-performance FPV drones.
It offers exceptional speed and responsiveness, guaranteeing you a very good flying experience.
This 0805 14000KV motor, designed with precision and durability in mind, will be perfect on the Stargazer mini drone.
Speci..
77.90€
Ex Tax:63.85€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Ex Tax:54.84€
Model: JH61709
This Mamba MK5 G4 6S 40A AIO from Diatone mounts in 25.5x25.5mm and only supports Alpha, not BetaFlight.
HD and analog compatible, this AIO has an OSD, TVS protection and 4 UARTS.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Specificatio..
100.90€
Ex Tax:82.70€
Model: JH61299
The Reactor 66 ESC supports 4-6S voltage and DSHOT300/600/1200.
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 66A × 4
Burst: 105A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_66
Soft : DSHOT300/600/1200
PWM : 24~128k
Mounting : 20x20mm, M2/M3
Included
1x..
67.90€
Ex Tax:55.66€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)