![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: minivideo
OneDrone 5.8 GHz 200 mW mini Video TX/RX kit
TX Specifications:
Weight: 11g Dimension: 39*27*5mm Working Voltage:DC12V Working Current:150mA Working Frequency:5.8 GHz
Working Channels:9CH Working Power:200mW Transmitting Range: Min. 500M line of sight
RX Specifications:
Weight:35g Dimension:69*37*..
15.90€
Ex Tax:13.03€
Model: ichargduo
iCharger 4010Duo. The solutions for proffesionalls!With two channels available, each of which can charge at up to 40 amps simultaneously, it"s like having two superchargers in one.Or combine both channels in parallel to achieve up to 70 amp charge rates! With two JST-XH & ThunderPower balance boards..
444.90€
Ex Tax:364.67€
Model: gbm5208h
iPower Gimbal Brushless Motor GBM5208H-150T Hollow Shaft
Specs:
Model NO.:GBM5208H-180T
Weight:172g
Motor Dimensions:63x25mm
Stator Dimensions:52x8mm
Copper wire(OD):0.27mm
Configuration:12N14P
Resistance:10.2 ohms
Wind type and termination method:Star style
Pre-wounded with 180 turns,Hollow shaft
F..
60.90€
Ex Tax:49.92€
Model: 4216cw2
Specs
Stator Size: 42x16 mm KV: 310 rpm/V Weight: 195 g
In The Box
4216 Motor CW x1..
45.90€
Ex Tax:37.62€
Brand: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
64.90€
Ex Tax:53.20€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
15.90€
Ex Tax:13.03€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€
Model: MAU2-061
Power-Cube / Pixhawk 2.1 Backup / 2x C-M-6P + 1x JR / 200mm
To connect Power-Cube output 2 to Pixhawk 2.1 Power 2 connector as backup.
The JR connector can be connected to the servo rail to power up opto ESC"s or any other equipment.
REM: This cable is standard delivery with Power-Cube 2, 3, and 4 !..
8.90€
Ex Tax:7.30€
Model: MAU2-109
This cable connects the P-C current sensor to any Power-Cube.
Inclusive 2 resistors to modify the voltage sense wire to an higher LiPo voltage (60V or 90V)
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€
Brand: Mauch Electronic
Model: MAU2-060
Power-Cube / Pixhawk 2.1 cable / 2x Clik-Mate-6P / L = 200mm
To connect Power-Cube output 1 to Pixhawk 2.1 Power 1 connector.
REM: This cable is standard delivery with any Power-Cube !..
6.90€
Ex Tax:5.66€