Search Criteria
Products meeting the search criteria
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
12.21€
Ex Tax:12.21€
Model: UP-1200+
The most Advanced Charger on the MarketUltra Power UP1200+ 25A UAV/Agricultural Drone Fast Balance Charger/Discharger With Display Screen For 8 Channel 2-6S LiPo LiHV Battery
UP1200+ have a color display screen to clearly show the charging status, the user can well know the charging data, like char..
439.26€
Ex Tax:439.26€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
30.25€
Ex Tax:30.25€
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
188.44€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
147.46€
Ex Tax:147.46€
Brand: T-Motor
Model: TM-MF-2412
T-motor MF2412 24,4x8,7 folding prop pair CW+CCW..
52.38€
Ex Tax:52.38€
Brand: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
77.79€
Ex Tax:77.79€
Model: SK-D250
Ultimate D250 AC/DC Balance Charger/Discharger/Power Supply
250Watt 10AMP
SkyRC D250 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously, the synchronization mode is available, in which users could perform synchronous set..
122.87€
Ex Tax:122.87€
Model: DJI-P4-CW
Phantom 4 series- 2312S Motor CW (Part No.24)..
19.59€
Ex Tax:19.59€