![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: RadioMaster
Model: RM-TX12
Size： 170*159*108mmWeight： 363gFrequency： 2.400GHZ-2.480GHZRF Chip： Single-chip Multi-protocol（CC2500）Supported Protocols： Corona, Hitec, Futaba S-FHSS, Frsky D16/D8, RadioLink, Graupner HoTTTransmitting Power： 20dbmAntenna Gain： 2dbWorking Current： 160mA@8.4VVoltage Range：6.6-8.4v DCRange： > 2km @ ..
89.90€
Ex Tax:73.69€
Brand: Gens Ace / Tattu
Model: GA-T-16-C12S
Tattu Plus 1.0 Compact version 16000mAh 12S 15C 44.4V Lipo battery pack with XT90-S Plug is suitable for Freefly AltaX, agricultural spraying drone, security mapping, power inspection and other industries. The whole system includes data acquisition, security warning, power calculation, automatic equ..
728.90€
Ex Tax:597.46€
Model: GA-T-RL3-6S
Tattu R-Line 1050mAh 120C 6S1P lipo battery pack What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It"s the selling version of Toppilot batteries. It"s also a subsidiary of the Tattu brand. It"s got higher capacity, lower internal resi..
30.90€
Ex Tax:25.33€
Model: KW-AWG-12B
High quality flexible silicone insulated electrical wire cable with tinned copper conductor
• 600v operating voltage• Working temperature between -60 and 200 degrees• Gauges: 10, 12, 14, 16, 18, 20• Colours: Red, Black
10 AWG - Max current: 140A. Conductor Area: 5.3 mm. Stranding: #1650/0.08 mm12 AW..
7.90€
Ex Tax:6.48€
Model: KW-AWG-12R
High quality flexible silicone insulated electrical wire cable with tinned copper conductor
• 600v operating voltage• Working temperature between -60 and 200 degrees• Gauges: 10, 12, 14, 16, 18, 20• Colours: Red, Black
10 AWG - Max current: 140A. Conductor Area: 5.3 mm. Stranding: #1650/0.08 mm12 AW..
7.90€
Ex Tax:6.48€
Brand: Gens Ace / Tattu
Model: GA-T-12-30
Tattu 30C 6S 16000mAh Lipo Battery is the most powerful battery and it is suitable for even the most demanding multi-rotor aircrafts and drones like DJI S1000, KOPTERWORX Hammer X8 and E1200 multirotors etc; Tattu 16000mAh 6S 30C Lipo has Maximum capacity, super long flight time beyond known limits ..
247.90€
Ex Tax:203.20€
Model: FF-AX-12V
Installs on the Alta X (replaces blank side panel) to allow integrated, on-board, power for 12V accessories from the main batteries.
Features
XT30 Female connector for powering accessories
Pulls power from flight packs to simplify battery needs..
284.90€
Ex Tax:233.52€
Model: KW-BEC-6S
High Quality, small and light 5V/12V 3A UBEC Support 2-6S/3-6S Lipo Battery Fully Shielded Anti-interference Voltage Stabilizer in Alu housing
Move switch on the side, switch between two output voltages: 5V or 12V
Input voltage: 7-28V (2-6S)Current output: 3AOutput voltage: 5V/12V (switch)Operating ..
14.90€
Ex Tax:12.21€
Model: UP-1200+
The most Advanced Charger on the MarketUltra Power UP1200+ 25A UAV/Agricultural Drone Fast Balance Charger/Discharger With Display Screen For 8 Channel 2-6S LiPo LiHV Battery
UP1200+ have a color display screen to clearly show the charging status, the user can well know the charging data, like char..
535.90€
Ex Tax:439.26€
Model: HK-SB-12S
The all new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind.It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V. It works with 2-13 cell lipoly packs and supplies an interference free constant 5V to your receiver a..
36.90€
Ex Tax:30.25€
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
229.90€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
179.90€
Ex Tax:147.46€