%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: ImmersionRC
Model: IM-TRHV-VOR
ImmersionRC Tramp module for Vortex 250/275/285
This is the long-awaited Tramp module for the Vortex 250/275/285 Quadcopters. Replacing both the 25mW, and 350mW transmitters, and offering variable power output from approx. 2mW -> 600mW. Also includes a TNR Tag for installation within the plastic sid..
22.05€
Ex Tax:22.05€
Brand: ImmersionRC
Model: IM-VO-150
For full product specifications, refer to the Immersion RC Product Page:
Vortex 150 Mini Product Page
* The EU Version is identical to the International, and USA versions, with one exception. The firmware is region-locked to prevent transmission outside of the EU ISM band. All ImmersionRC/FatShark c..
189.26€
Ex Tax:189.26€
Model: vortex3mmarm
A single 4mm Carbon Fiber arm, for 5" props, as installed on the stock 250 Pro UmmaGawd edtion...
12.21€
Ex Tax:12.21€
Model: vortexplastic
Vortex Crash Kit #1: Standard Plastic Parts
These are parts most likely to break in a serious crash. Included are all parts which mount the motors to the carbon fiber arms, the plastic pivot points, foldable arm clips, and all other plastic parts. No carbon fiber parts are included in this crash kit..
12.21€
Ex Tax:12.21€
Model: vortexmobius
Vortex Mobius Incliner Kit
An updated anti-jello plate for the Vortex, which inclines the Mobius by 20 degrees, for optimal camera angle when flying at speed.
Includes:
1x Baseplate (Carbon Fiber)
1x Top Plate (Carbon Fiber)
2x 20 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminiu..
23.69€
Ex Tax:23.69€
Model: vortexkit
Vortex Crash Kit #2: Carbon Fiber Parts
In most serious crashes, the parts in Crash Kit #1 will suffice to get the Vortex in the air again. For the real serious stuff, parts from Crash Kit #2 may be required.
Contains the following parts:
1x Top Frame, Carbon Fiber1x GoPro anti-vibe plate, short, ..
45.00€
Ex Tax:45.00€
Model: vortexgopro
Vortex GoPro Recliner Kit
An updated anti-jello plate for the Vortex, which reclines the GoPro by 30 degrees, for optimal camera angle when flying at speed.
Includes:
1x Baseplate (Carbon Fiber)
1x Back Plate (Carbon Fiber)
2x 30 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminium..
26.97€
Ex Tax:26.97€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
13.03€
Ex Tax:13.03€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
22.05€
Ex Tax:22.05€
Model: vortupgrademet
Vortex Metal Arm Mount Upgrade
Precision CNC milled aluminum arm clamps, designed for the hard-core Vortex racer.
After upgrading with this kit, the Vortex arms no longer fold, but instead are very rigidly mounted to the frame.
Includes:
- 8x Anodized, CNC Milled, Top Clamp
- 8x Anodized, CNC Mille..
43.36€
Ex Tax:43.36€
You have reached the end of the list.