![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: uni mount25mm
This is universal mount / holder for 25mm booms.
You can easy mount:- any TX video link- WKM, Naza or A2 Led- datalink link- ...
Scope of delivery1x boom clamp 255mm pair2x screw M3+nut2x carbon plates..
19.90€
Ex Tax:16.31€
Model: unilcdmount
Are you tired of screwing Monitor to Phantom remote, Camera on tripod, small LCD on Ronin or Movie, ....?
Kopterworx have solution for you:
Universal Quick release system for monitors, cameras, ....
For mounting and releasing u need 2 seconds.
..
36.90€
Ex Tax:30.25€
Model: mobileholderm
Mobile-grip-M for FPV Pult PRO - Phantom, Inspire, Ronin, Futaba ..
Can be used in almost all tablets.(Can use 96mm-140mm FPV Monitor & Tablet PC) * Include: Easy ball clamp 60mm , TX-Tray shaft ,SE-mobile-grip-M Total weight: 205g...
179.90€
Ex Tax:147.46€
Model: fpvpultmobileL
Mobile-grip-L for FPV Pult PRO - Phantom, Inspire, Ronin, Futaba ...
Material: aluminium 6061-T6 (anodized) Can be used in almost all tablets. (Can use ipad mini, ipad Air, iPad3, iPad4)
Total weight: 205g..
179.90€
Ex Tax:147.46€
Model: fpvpultjeti
FPV pult PRO - JETI DS-16 + cCarbon Sheets
Material: aluminium 6061-T6 (anodized) Only can use for JETI DS-16 Color: (Red & Ti-Silver)
INCLUDES: Tx-tray for JETI DS-16 , Carbon Sheet Total Weight: 250g..
170.90€
Ex Tax:140.08€
Model: hdmiminiflat
The world lighter and thinner mini flat to Hdmi cable, lenght 50 cm. weigh only few grams...
23.90€
Ex Tax:19.59€
Brand: DJI
Model: DJI-IN2-HR
Overview
Used to mount the DJI Focus Handwheel to the remote controller, enabling a single operator to adjust Zenmuse X5S focus more easily.
In the Box
Inspire 2 - DJI Focus Handwheel Remote Controller Stand ×1
Compatibility
Inspire 2DJI Focus HandwheelDJI Focus Handwheel - Inspire 2 RC CA..
59.90€
Ex Tax:49.10€
Brand: Mauch Electronic
Model: MAU2-040
This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL - Series.
REM: This cable is standard deliverred together with any BEC or Sensor Hub X2-V2 ..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-042
This cable is for the PL 2-6S series BEC"s to connect to Pixhawk 2.1 or any flight controller with Molex / Clik-Mate / 2.0mm / 6p connector.
L = 150mm ..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-041
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with DF13-6p connector.
For example:
Pixhawk 1, APM... etc.
L = 150mm ..
5.90€
Ex Tax:4.84€
Brand: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
64.90€
Ex Tax:53.20€
Brand: Mauch Electronic
Model: MAU2-016
Input 2-6S LiPo / max. 28V.
Output 2x 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as ..
67.90€
Ex Tax:55.66€