![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: DJI
Model: DJI-M3-P-CP-RCP
Vodilni sistem s tremi kameramiS kamero 4/3 CMOS Hasselblad, 70 mm tele kamero in 166 mm tele kamero vam Mavic 3 Pro pomaga ustvarjati osupljiva dela v različnih scenarijih.4/3 CMOS kamera HasselbladKamera Hasselblad snema 5,1K/50fps in 4K/120fps[1]z razponom af/2,8 - f/11. 10-bitni način D-Log M po..
4,649.90€
Brez DDV:3,811.39€
Blagovna znamka: Mauch Electronic
Model: MAU2-005
250A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual..
64.90€
Brez DDV:53.20€
Blagovna znamka: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
229.90€
Brez DDV:188.44€
Blagovna znamka: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
179.90€
Brez DDV:147.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
94.90€
Brez DDV:77.79€
Blagovna znamka: Mauch Electronic
Model: MAU2-010
This sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace ex..
54.90€
Brez DDV:45.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-003
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
56.90€
Brez DDV:46.64€
Blagovna znamka: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
179.90€
Brez DDV:147.46€
Blagovna znamka: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
74.90€
Brez DDV:61.39€
Blagovna znamka: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
124.90€
Brez DDV:102.38€
Model: FY-G4Plus
Product Highlights• 3-Axis Motorized Gimbal• Supports Phones Up to iPhone 6 Plus• Fixed Axes and Pan/Tilt Following Modes• 320° Pan/Tilt Rotation• 100° Roll Rotation• Single-Button Operation• Battery Level Indicator Light• Optional Gimbal Remote Control• Four Batteries and Charger IncludedThe Feiyu..
231.90€
Brez DDV:190.08€
Model: H9-TWST-4-8-16
Premium Gorilla Glass High Quality Adhesive ND4 / ND8 / ND16 Filter Set for GoPro Hero 9 and Hero 10 made of premium optical glass. These filters snap on and off without tools, replacing the clear lens coating, while maintaining the seal.
ND transmission comparison:
ND4 (ND 0.6) 25% transmission ..
65.90€
Brez DDV:54.02€