![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: deansultrastec
High current connector Up to 50 - 70A possible DEANS compatible.
scope of delivery
1 male connector..
1.90€
Ex Tax:1.56€
Model: deansultrabuch
One set high current connector Up to 50 - 70A possible DEANS compatible.
scope of delivery
1 female connector..
1.90€
Ex Tax:1.56€
Brand: DJI
Model: djiprops
Adopt PC/ABS ultrastrength material design,fine surface hardness ,anti-impact.
Scope of delivery:2x pair big ones1x pair small ones..
10.90€
Ex Tax:8.93€
Model: cs6bp
Description
CINESTAR 8 TOP PLATE:
1 - C8 Bottom Plate
6 - Press Nuts..
125.90€
Ex Tax:103.20€
Model: ant11dbpatch
One of the best 11 patch antennas for very long range.
U can move antenna in every direction 90/360 degress.
Electrical Specifcation:Frequency 5700-5900 MHzGain 12 dBiHorizontal Beam Width 75 degreesVertical Beam Width 60 degreesSmall dimensions 70x70 mmVery light - 15gOperating Temperature -40° ..
48.90€
Ex Tax:40.08€
Model: combicpcfk
his Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frame You will need two of these Combi Centerplates for a frame.
Technical data
Diameter: about 18cm
Thickness: about 1.1mm
Color: black
Material: Carbon
Weight: ca. 28g
Sc..
45.90€
Ex Tax:37.62€
Model: quadro2xlc
4 ESCs on two boards! Extremely fast brushless controllers version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader) Note: The BL-Ctrl 3.0 controller is specifically..
329.90€
Ex Tax:270.41€
Model: oktoxlc
8 ESCs on one board! Extremely fast brushless controller version V3 for our MikroKopter IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wiki ! The board is tested and programmed (including bootloader) Note: The BL-Ctrl 3.0 controller is specifically d..
475.90€
Ex Tax:390.08€
Model: uni mount25mm
This is universal mount / holder for 25mm booms.
You can easy mount:- any TX video link- WKM, Naza or A2 Led- datalink link- ...
Scope of delivery1x boom clamp 255mm pair2x screw M3+nut2x carbon plates..
19.90€
Ex Tax:16.31€
Brand: Mauch Electronic
Model: MAU2-088
Mauch Standard Line Customized cable from HS-xxx-xx Sensor Board to Pixhawk / APM
The cable is made of AWG28 silicone wires with original Hirose DF13 connectors.
The total cable length should not exceed 290mm.
The cables are "hand made" and electrical tested.
If no requested cable length is provided..
5.90€
Ex Tax:4.84€
Model: p2pa9
Phantom 2 FPV Cable & Hub Part 9..
12.90€
Ex Tax:10.57€