![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: ballhead
Material: aluminium 6061-T6 Only use for 25.00mm Tube Total weight: 50.0g..
75.90€
Ex Tax:62.21€
Brand: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Ex Tax:6.48€
Brand: DJI
Model: DJI-IN2-NC
SERVICE PART: DJI Inspire 2 - Nose Cover (Part 1)..
13.90€
Ex Tax:11.39€
Brand: DJI
Model: DJI-IN2-GPSM
SERVICE PART: DJI Inspire 2 - GPS Modul (PART5)..
64.90€
Ex Tax:53.20€
Brand: DJI
Model: DJI-IN2-GPSC
SERVICE PART: DJI Inspire 2 - GPS Cover (PART 11)..
3.90€
Ex Tax:3.20€
Brand: DJI
Model: DJI-RG-P1
DJI Goggles Racing Edition - Pagoda Antenna (SMA Interface) (Part 1)
The Pagoda Antenna (SMA interface) is a 5.8 GHz Left Hand Circular Polarized (LHCP) omnidirectional antenna, which can be connected to Goggles RE"s SMA interface to obtain better result on signal reception by working with the built..
10.90€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Brand: DJI
Model: DJI-RG-P6
DJI Goggles Racing Edition - OcuSync Pagoda Antenna SMA interface (Part 6)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via th..
10.90€
Ex Tax:8.93€
Brand: DJI
Model: DJI-RG-P5
DJI Goggles Racing Edition - OcuSync Pagoda Antenna MMCX interface (Part 5)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via t..
10.90€
Ex Tax:8.93€
Brand: DJI
Model: DJI-RG-P8
DJI Goggles Racing Edition - OcuSync Dipole Antenna (Part 8)
The OcuSync Dipole Antenna is a lightweight dual-frequency omnidirectional antenna suitable for short-distance flight, which connects to the Air Unit via the MMCX interface...
10.90€
Ex Tax:8.93€