![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: FF-MXL-CP
XL Camera plate allows users to securely mount their camera to MōVI XL dovetail. It features a ARRI compatible lightweight design and adaptable camera mounting slots to accommodate a variety of camera bolt spacing and sizes. The system features a clamping lever to lock the plate to the dovetail as..
540.90€
Ex Tax:443.36€
Model: FF-MP-13
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MōVI Controller, Pilot, MōVI Ring Pro, Adjustable Monitor Mount Quick Release, Low Profile Handle, etc.
Features:
Compatible with all Freefly ..
96.90€
Ex Tax:79.43€
Brand: DJI
Model: DJI-IN2-GPSM
SERVICE PART: DJI Inspire 2 - GPS Modul (PART5)..
64.90€
Ex Tax:53.20€
Brand: DJI
Model: DJI-RG-P1
DJI Goggles Racing Edition - Pagoda Antenna (SMA Interface) (Part 1)
The Pagoda Antenna (SMA interface) is a 5.8 GHz Left Hand Circular Polarized (LHCP) omnidirectional antenna, which can be connected to Goggles RE"s SMA interface to obtain better result on signal reception by working with the built..
10.90€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Brand: DJI
Model: DJI-RG-P6
DJI Goggles Racing Edition - OcuSync Pagoda Antenna SMA interface (Part 6)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via th..
10.90€
Ex Tax:8.93€
Brand: DJI
Model: DJI-RG-P5
DJI Goggles Racing Edition - OcuSync Pagoda Antenna MMCX interface (Part 5)
Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via t..
10.90€
Ex Tax:8.93€
Brand: DJI
Model: DJI-RG-P8
DJI Goggles Racing Edition - OcuSync Dipole Antenna (Part 8)
The OcuSync Dipole Antenna is a lightweight dual-frequency omnidirectional antenna suitable for short-distance flight, which connects to the Air Unit via the MMCX interface...
10.90€
Ex Tax:8.93€
Brand: ProfiCNC/HEX
Model: OD-HERE-CAB2
ProfiCNC/HEX Here GPS2 port cable for second GPS...
4.90€
Ex Tax:4.02€
Brand: Gremsy
Model: GR-UMP
The T1/T3 - Universal Mounting Plate when used with Hyper Quick Release, Smart Battery gMount, Smart Battery (4S - 3400mAh) to install Gremsy T1/ T3 on carmount, buggy and cablecam....
** Please note you may need to add Hyper Quick Release to switch from your drone to another devices.
**Please note..
79.90€
Ex Tax:65.49€