Search Criteria
Products meeting the search criteria
Model: FW19002978
Flywoo"s next generation F722 PRO Mini V2 flight controller not only offers a high-performance 20x20mm STM32F722 main chip, but it also supports 8 motor outputs.
Combined with the GOKU G45M 4in1 ESC, it forms a high-performance mini stack equipped with an ICM42688 gyro, a 16MB blackbox or even a 10V..
81.90€
Ex Tax:67.13€
Model: MD010703
Hisingy"s powerful Matrix motor was designed for high-performance FPV drones.
It offers exceptional speed and responsiveness, guaranteeing you a very good flying experience.
This 0805 14000KV motor, designed with precision and durability in mind, will be perfect on the Stargazer mini drone.
Speci..
77.90€
Ex Tax:63.85€
Model: MD010705
Hisingy"s powerful Hercules motor was designed for high-performance FPV drones.
It offers exceptional speed and responsiveness, guaranteeing you a very good flying experience.
This 0805 16000KV motor, designed with precision and durability in mind, will be perfect on the Stargazer mini drone.
Spe..
77.90€
Ex Tax:63.85€
Model: W4-FW060006-G1G1-TX1
Check out the Flycolor Trinx G5 60A 4-in-1 ESC with 60A of continuous current support, you will have plenty of headroom to push your rig to the limit.
With the high-powered MCU and Raptor 5 firmware, this is a path towards the next level for your builds!
Bullet Points
PWM frequency up to 128K..
90.90€
Ex Tax:74.51€
Model: AXIS-AE2207-V2-1960
Second version of AxisFlying AE2207 motors, more durable, more resistant, more powerful!
No matter the location, time or environment, the AE2207 V2 will give you the best control and the best response speed to satisfy your thirst for flight, whether for proxy, juicy or bando freestyle.
Here is the 1..
21.90€
Ex Tax:17.95€
Model: FINBU01
Flywoo"s Buzzer Finder V1.0 has two operating modes:
Traditional active buzzer function and synchronized with HR
When the FC is connected normally and the battery is turned off, the finder V1.0 can still automatically output 100dB and the LED will emit white light.
To deactivate the buzzer, pres..
10.90€
Ex Tax:8.93€
Model: JH61766
This Mamba MK5 F435 55A stack from Diatone has an ICM-42688P gyro, an OSD, a barometer as well as 5 UARTS.
The Mamba F55 BLHeli_S ESC supports 4-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK5 F435 FC
MCU: 288 MHz AT32F43..
66.90€
Ex Tax:54.84€
Model: GTSV3-1303-11500KV
The GTS V3 1303 in 11500KV from Rcinpower is a powerful race motor intended for Cinewhoops / Toothpicks from 2 to 3".
Specifications
KV: 11500
Configuration : 12N14P
Stator diameter : 13mm
Stator Length : 3.2mm
Shaft diameter : 1.5mm
Dimensions : 16.5*10.1mm (dia)
Weight : ~5.6g (with wire)
Id..
15.90€
Ex Tax:13.03€
Model: HARDLINE-2208-2000-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 2000
No-Load current (@10V) : 1.6A
Weight ..
36.90€
Ex Tax:30.25€
Model: GTSV2-12025-11500KV
New powerful motor from Rcinpower, the GTS V2 1202.5 with 11500KV.
Specifications
KV: 11500
Configuration : 9N12P
Stator diameter : 10mm
Stator Length : 2.5mm
Shaft diameter (inner) : 2mm
Shaft diameter (external): 1.5mm
Dimensions : 15.95*9.1mm (dia)
Weight : ~3.9g
Idle current(5)@5V : 1.3A
N..
14.90€
Ex Tax:12.21€
Model: JH61299
The Reactor 66 ESC supports 4-6S voltage and DSHOT300/600/1200.
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 66A × 4
Burst: 105A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_66
Soft : DSHOT300/600/1200
PWM : 24~128k
Mounting : 20x20mm, M2/M3
Included
1x..
67.90€
Ex Tax:55.66€
Model: JH61608
The Reactor 44 ESC supports 4-6S voltage and DSHOT300/600/1200/MAX2400 (FETTEC).
Specifications
Input voltage: 4 ~ 6S Lipo (16.8V ~ 25.2V)
Continuous current: 44A × 4
Burst: 54A (10S)
BEC : NO
Target: BLHeli_32 MAMBA5_Reactor_44
Soft : DSHOT300/600/1200/MAX2400 (FETTEC)
PWM : 24~128k
Mounting :..
62.90€
Ex Tax:51.56€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)