![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: EX2807-1300KV
Rcinpower"s EX2807 1300KV motors are of reliable quality and offer exceptional stability, they will be the solution in terms of power for your 6-7" drone.
Specifications
KV: 1300
Configuration : 12N14P
Stator diameter : 28mm
Stator Length : 7mm
Shaft diameter : 5mm
Dimensions : 34.3*32.9mm (di..
21.90€
Ex Tax:17.95€
Model: CINE80A-12S-TMOTOR
New T-Motor Cine 80A individual ESC for cinelifters.
It supports BLHeli_32 and is 5-12S compatible.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
Bullet points
Tested under 12S voltage, 80A maintains output for 30s
Only 31.2g
Power den..
146.90€
Ex Tax:120.41€
Model: AXIS-SYNCFPV-2207-1860
New 2207.5 motor in 1860KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1860
Internal resistance: 58.13mΩ
Shaft diameter: 5mm
Confi..
21.90€
Ex Tax:17.95€
Model: AXIS-SYNCFPV-2207-1960
New 2207.5 motor in 1960KV born from the collaboration between AxisFlying and the pilot SyncFPV.
Ideal for freestyle in bandos, this motor with flashing colors will go perfectly with the BlackBird 4943.5 propellers.
Specifications
KV: 1960
Internal resistance: 58.08mΩ
Shaft diameter: 5mm
Confi..
21.90€
Ex Tax:17.95€
Model: NMB-BEARING-NT
This set of 10 NMB 9x4x4 bearings will allow you to replace those that are too worn in your motors starting to squeak a little too much over crashes with humidity.
Compatible with a large majority of 5" motors, remember to measure your current bearings using a caliper to be sure of the correct sizin..
20.90€
Ex Tax:17.13€
Model: HARDLINE-2208-1700-UNIT
New series of Hard Line motors from Xnova with this 2208 intended for freestyle and cinematic.
Fully tested and precisely balanced, the motor is simple to tune, is efficient and has a new design with a fully aluminum-encased rotor.
Specifications
KV : 1700
No-Load current (@10V) : 1.3A
Weight ..
36.90€
Ex Tax:30.25€
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Ex Tax:13.03€
Model: TMOTOR-V50A-ESC-4EN1-SE
The Velox 50A SE 4in1 ESC from T-Motor will guarantee you the performance you are looking for, whether in freestyle, cinematic or long range.
The Velox V50A 32Bit supports 3-6S voltage and measuring 30.5*30.5mm is perfectly suitable for Velox V3 motors.
Specifications
Current : 50A
Peak current..
77.90€
Ex Tax:63.85€
Model: JH61610
This Mamba F405 Mini Reactor 44 stack from Diatone has an MPU6000 gyro, an OSD, a barometer as well as 6 UARTS.
The Reactor 44 ESC supports a 3-6S voltage.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
MK4 F405 Mini
MCU: STM32F405
GYRO:..
99.90€
Ex Tax:81.89€
Model: AXIS-C246-1850KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 1850KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Ex Tax:22.05€
Model: SB-BLS-55A
The SpeedyBee BLHeli_S 55A 4in1 ESC mounts in 30.5x30.5mm, has a TVS protection diode and supports DSHOT300/600, a voltage of 3-6S and has BLHeli_S J-H-40 firmware.
Specifications
Firmware : BLHeli_S J-H-40
Wireless Configuration : Full Configuration Supported in the SpeedyBee app
Continuous C..
53.90€
Ex Tax:44.18€
Model: F55A-3-6S-32BITS--1
The upgraded F55A PROIII 4-in-1 ESC is a super ESC that features the TPHR8504 MOSFETs and is controlled by the STM32G071 microcontroller. Its stability is exceptionally high, surpassing that of previous ESCs and other products on the market.
It has added TVS protection to enhance its durability and ..
135.90€
Ex Tax:111.39€