![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Top Brand
Brand: TBS
Model: tbsts
Shield the TBS CORE from any RF-noise that may appear from ESCs or other noisy equipment on board. Also shields the UHF receiver from interference from the TBS CORE. A neat little add-on for the long-range afficionados!..
11.90€
Ex Tax:9.75€
Model: ppmi2ccboard
PPM / I2C Breakout Board Setfor standard servo connector and solder points for I2C..
19.90€
Ex Tax:16.31€
Model: clohelic
The longest range what u can get is with this combo.
5.8GHz Cloverleaf Antena + Helical Axial antena with 13 dbi in case.
This is great setup for FPV TBS or other users...
30.90€
Ex Tax:25.33€
Brand: DJI
Model: s800armcwleftg
DJI Frame arm complete for S800 EVO CW and green led..
229.90€
Ex Tax:188.44€
Brand: DJI
Model: s800armccwleft
DJI Frame arm complete for S800 EVO CCW and red led..
229.90€
Ex Tax:188.44€
Model: cf2525
Material: aluminium 6061-T6 Total weight: 32.5g (2) One pair..
49.90€
Ex Tax:40.90€
Model: rx700nr
Scherrer RX700NR Normal Range UHF RX
Rx700NR is a small and very light receiver with a sensitivity of -102dBm and a optimized input filter so it can co-exist with strong 2.4Ghz on board video transmitters. The RX comes with a wire antenna mounted directly on the unit.
The RX700 NR comes with a lo..
48.90€
Ex Tax:40.08€
Brand: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Ex Tax:6.48€
Model: 7inchalmiauto
Description:7 Inch TFT LCD Screen FPV Monitor LT5802S 5.8G 40CH LED Backlight Multicopter with Build-in Battery Feature:1. Battery operation state OSD display: RSSI signal; index; channel indication.2. Automatic signal search.3. Support Chinese and English menus.4. Format: JPEG, AVI.5. Built-in dual..
121.90€
Ex Tax:99.92€
Model: FF-MXL-CP
XL Camera plate allows users to securely mount their camera to MōVI XL dovetail. It features a ARRI compatible lightweight design and adaptable camera mounting slots to accommodate a variety of camera bolt spacing and sizes. The system features a clamping lever to lock the plate to the dovetail as..
540.90€
Ex Tax:443.36€
Model: FF-MP-13
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MōVI Controller, Pilot, MōVI Ring Pro, Adjustable Monitor Mount Quick Release, Low Profile Handle, etc.
Features:
Compatible with all Freefly ..
96.90€
Ex Tax:79.43€
Brand: DJI
Model: DJI-RG-P1
DJI Goggles Racing Edition - Pagoda Antenna (SMA Interface) (Part 1)
The Pagoda Antenna (SMA interface) is a 5.8 GHz Left Hand Circular Polarized (LHCP) omnidirectional antenna, which can be connected to Goggles RE"s SMA interface to obtain better result on signal reception by working with the built..
10.90€
Ex Tax:8.93€