Search Criteria
Products meeting the search criteria
Model: resc15
Description
Opale Paramodels invites you to push the limits and experiment extreme flying for even more fun and excitement by offering the Rescue 15.0. This parachute is compatible with Multirotors, it unfolds on order in a split second to ensure a smooth landing after a maneuver much less smooth! T..
449.90€
Ex Tax:368.77€
Model: rx700nr
Scherrer RX700NR Normal Range UHF RX
Rx700NR is a small and very light receiver with a sensitivity of -102dBm and a optimized input filter so it can co-exist with strong 2.4Ghz on board video transmitters. The RX comes with a wire antenna mounted directly on the unit.
The RX700 NR comes with a lo..
48.90€
Ex Tax:40.08€
Model: scherrerplugst
Scherrer RC adapter Plugs to Tx
Futaba Square or Graupner connector cable (please write note which version do you need when ordering) for Plug-and-play connection to different types of radios...
54.90€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-081
3D printed enclosure for the Sensor Hub X2
The enclosure should be installed with double side tape (included).
The Sensor Hub X2 will just “click” into the bottom part and the top should be secured with any ABS (Acetone) glue or Cyanoacrylate (super) glue.
REM: It is the nature of 3D printed parts,..
7.90€
Ex Tax:6.48€
Brand: Mauch Electronic
Model: MAU2-013
The Sensor Hub X8 collects the current measurements from up to eight Power-Cube current sensors. The currents are summed up and passed to the Pixhawk flight controller via the Power-Cube power supply. The voltage measurement of the LiPo packs is measured separately by the Power-Cube.
An OLED display..
199.90€
Ex Tax:163.85€
Model: 7inchalmiauto
Description:7 Inch TFT LCD Screen FPV Monitor LT5802S 5.8G 40CH LED Backlight Multicopter with Build-in Battery Feature:1. Battery operation state OSD display: RSSI signal; index; channel indication.2. Automatic signal search.3. Support Chinese and English menus.4. Format: JPEG, AVI.5. Built-in dual..
121.90€
Ex Tax:99.92€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-083
Input 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Input wrong polarity protection, as well as Panasonic FM input and output capacitors to prevent burn out of the UBEC from voltage spikes.
20cm output cable with Molex / 6p / Clik-Mate 2.0mm. (To ..
31.90€
Ex Tax:26.15€
Brand: DJI
Model: DJI-IN2-INSP1TO2
DJI Inspire 2 - Inspire 1 Adapter to Inspire 2 Charging Hub Power Cable (PART42)
This cable is used to connect the Inspire 2 Battery Charging Hub to the Inspire 1 Battery Charger (compatible with both 180 W and 100 W Battery Chargers) for Inspire 2 battery charging.Contents:1x Adapter cable..
11.90€
Ex Tax:9.75€
Model: xt90chac
Charging cable to connect the charging device and the Lipo...
10.90€
Ex Tax:8.93€
Model: spirocircpatch
This 5.8GHz Circularly Polarized patch antenna was custom-designed, with no expense spared, for the FPV market. Light enough to be mounted directly onto an LCD headset, or directly onto the front of one of our Uno, or Duo receivers.
This antenna will breathe new life into the CE-Legal 25mW systems, ..
80.90€
Ex Tax:66.31€
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)