Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-005
250A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual..
53.20€
Brez DDV:53.20€
Blagovna znamka: T-Motor
Model: TM-NF-26-1
T-motor NF 26x8,5 3rd Generation of CF folding prop, (bottom prop, push type)
One of best folding prop on market, perfectly balanced...
308.11€
Brez DDV:308.11€
Blagovna znamka: T-Motor
Model: TM-NF-26
T-motor NF 26x8,5 3rd Generation of CF folding prop
One of best folding prop on market, perfectly balanced...
308.11€
Brez DDV:308.11€
Blagovna znamka: T-Motor
Model: TM-NF-18
T-motor NF 18x6,2 3rd Generation of CF folding prop
One of best folding prop on market, perfectly balanced...
138.44€
Brez DDV:138.44€
Blagovna znamka: T-Motor
Model: TM-NF-22
T-motor NF 22x7,2 3rd Generation of CF prop
One of best folding prop on market, perfectly balanced...
218.77€
Brez DDV:218.77€
Blagovna znamka: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
77.79€
Brez DDV:77.79€
Blagovna znamka: Mauch Electronic
Model: MAU2-010
This sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace ex..
45.00€
Brez DDV:45.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-003
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
46.64€
Brez DDV:46.64€
Model: APX5-ARM-5.5-R0-W
replacement Apex 5" arm
Sold with 1 pressnut
Thickness : 5.5mm..
8.93€
Brez DDV:8.93€
Model: MAPX4-ARM-4
Replacement 4" arm, 4mm for the Micro Apex frame by ImpulseRC...
4.84€
Brez DDV:4.84€
Model: APX-KEY-5-R0
Replacement CF ARM KEY for the Apex frame by ImpulseRC...
3.20€
Brez DDV:3.20€