![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 01100005
New Micro Air canopy from BetaFPV, extremely light and easy to adjust the angle from 25 to 50°.
Compatible with cameras with a lens diameter of 9-10mm such as the C02/C03 cameras, the Avatar HD Lite or the Ant Lite.
The micro air canopy is the perfect choice if you want to build or improve ultra-lig..
3.90€
Ex Tax:3.20€
Model: TTV2CPY
Canopy for the TinyTrainer V2 from Five33.
Included
1x Canopy
Voir plus..
9.90€
Ex Tax:8.11€
Model: FP15917
This set for the Iflight Mach R5 Sport consists of the canopy, a sharkfin and a set of screws.
Included
1x Canpoy
1x Sharkfin
5x M2*8mm screw
1x Quick release buckle
Voir plus..
6.90€
Ex Tax:5.66€
Model: 3S20154--1
Canopy for the Mobula8 and the Bassline HDZero from Happymodel.
Specifications
Material : PP
Weight : 0.8g
Color : Transparent black
Included
1x Canopy
Voir plus..
4.90€
Ex Tax:4.02€
Model: FP08259
Canopy intended to protect a 14mm nano camera on the Iflight Alpha A85.
Included
1x 14mm canopy
Voir plus..
7.90€
Ex Tax:6.48€
Model: 3S20127--1
Canopy for the Mobula8 and the Moblite7 Walksnail from Happymodel.
Specifications
Material : PP
Weight : 1.4g
Color : Transparent black
Included
1x Canopy
Voir plus..
4.90€
Ex Tax:4.02€
Model: CAN-G474
Matek"s CAN-G474 is a Node adapter based on ArduPilot AP-Periph firmware.
With this board, you will be able to more easily use ArduPilot to convert GNSS, Compass, barometers, airspeed sensor, PWM and buzzer devices to DroneCAN devices.
CAN-G474 has STM32G474 chip and 5Mbit/s transceiver.
Spec..
24.90€
Ex Tax:20.41€
Model: CANPDB-4A
This CANPDB from Matek will allow you to plug four CAN devices into one plug.
*Power and distance are subject to specific regulations, be sure to respect those established in the country where you are playing.
Specifications
6V to 55V Operating Input Range(2S-12S Li-xx)
5.2V output on “5V” p..
18.90€
Ex Tax:15.49€
Model: *CAN-L4-RC
This L4 RC CAN adapter from Matek is based on the ArduPilot AP_Periph firmware and allows you to turn a serial receiver into a CAN receiver.
Specifications
MCU: STM32L431xC, 256KB Flash
1x CAN, DroneCAN Protocol
1x UART(UART3, Tx3/ Rx3)
ST debug, SWCLK & SWDIO
Input voltage range: 4.5~5.5V @..
15.90€
Ex Tax:13.03€
Model: PMPC51366-3
Gemfan Hurricane MCK ReV3 51366 propellers (5.1x3.66x3) in three blades with M5 shaft.
The Rev3 designed with the MCK pilot have everything to please you: responsiveness, endurance, grip in turns and speed!
The 51366 will be perfect for high KV motors and 6S.
Specifications
Size : 5.1inch
Shaf..
3.90€
Ex Tax:3.20€
Model: PMPC5236-3
Three-bladed 5236 (5.2x3.6x3) propellers from Gemfan.
Specifications
Inch : 5.2"
Pitch : 3.6"
Weight : ~3.9g
Mount : 5mm
Prop Disk Diameter: 134.1mm
Center Thickness: 6mm
Materials : PC
Included
2x CW 5236-3
2x CCW 5236-3
Voir plus..
3.90€
Ex Tax:3.20€
Model: PMPC7050-3
Three-bladed 7050 propellers from Gemfan.
Specifications
Size : 7"
Shaft : 5mm
Pitch: 5"
Weight: 8.9g
Material : PC
Included
2x CW 7050-3
2x CCW 7050-3
Voir plus..
4.90€
Ex Tax:4.02€