![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: PMPC5536-3
Three-bladed 5536 (5.5x3.6x3) propellers from Gemfan.
Specifications
Inch : 5.5"
Pitch : 3.6"
Weight : ~4.9g
Mount : 5mm
Materials : PC
Adaptive motor : 2306 and up
Included
2x CW 5536-3
2x CCW 5536-3
Voir plus..
3.90€
Ex Tax:3.20€
Model: PMPC6045-3
Three-bladed 6045 propellers from Gemfan.
Specifications
Inch: 6in
Pitch:4.5in
Weight:7g
Mount:5mm
Recommended Motor: 2506 2806.5
Prop Disk Diameter: 152.4mm
Center Thickness: 7mm
Materials : PC
Included
2x CW 6045-3
2x CCW 6045-3
Voir plus..
4.90€
Ex Tax:4.02€
Model: MT-ASPD-DLVR
Matek Digital Airspeed Sensor ASPD-DLVR
All sensors DLVR series is the best airspeed sensor ArduPilot currently support.
Specifications & Features• ArduPilot AP_Periph L431/F405/F303 CAN node• All sensors DLVR-L10D, Industrial temperature range• CAN & I2C Interface• Typical Platforms: Fixed-Wing, Qu..
129.90€
Ex Tax:106.48€
Model: PMPC2520-3
Gemfan 25203-blade propellers.
Specifications
Size : 2.5"
Shaft : 1.5mm
Pitch: 2"
Weight: 1g
Recommended motors (not included) : 110..
3.90€
Ex Tax:3.20€
Model: PMPC3630-3
Gemfan 3630 3-blade propellers with T-mount and M5 shaft.
Specifications
Size : 3.6"
Shaft : t-mount et M5
Pitch: 3"
Weight: 2.3g
Re..
3.90€
Ex Tax:3.20€
Model: PMPC2009-3
Gemfan 2009 3-blade propellers perfect for high KV motors.
Specifications
Size : 2"
Shaft : 1.5mm
Pitch: 0.9"
Weight: 0.3g
Recommend..
3.90€
Ex Tax:3.20€
Model: PMPC2008-2
Gemfan 2008 2-blade propellers perfect for high KV motors.
Specifications
Size : 2"
Shaft : 1.5mm
Pitch: 0.8"
Weight: 0.3g
Recommend..
2.90€
Ex Tax:2.38€
Brand: Matek
Model: CAN-L4-3100
This CAN magnetometer from Matek is based on RM3100 firmware and ArudPilot AP_Periph.
RM3100 technology offers high resolution, low power consumption and limits signal noise.
..
43.90€
Ex Tax:35.98€
Brand: Matek
Model: CAN-L4-BM
Matek"s CAN-L4-BM is an ultra-precise digital power monitor based on TI INA239 firmware and ArduPilot AP_Periph
Any flight controller that supports the DroneCAN protocol will be able to easily get accurate current and voltage readings via CAN.
..
35.90€
Ex Tax:29.43€
Model: GOOBER-V2
This second generation of Goober canopy from NewBeeDrone is intended for 14x14mm nano FPV cameras.
You can adjust the camera angle from 0 to 55°.
You can use Runcam Nano 4 and select NBD JST0.8 plug type with these canopy to work with BeeBrain FC.
..
7.90€
Ex Tax:6.48€
Model: PMPC5127-3
Gemfan Hurricane 5127 3-blade propellers.
Specifications
Size : 5.1inch
Shaft : M5
Pitch: 2.7
Weight: 4.4g
Recommended motors : 2306/..
3.90€
Ex Tax:3.20€
Brand: Gremsy
Model: GR-T3-DJI-1
Gremsy T1/T3 - Canlink Cable for DJI A3/N3
To connect from CAN port on the T1 to CAN port of GPS/Compass module on the DJI FC.
Lenght: 30cm, for T3 V2 version...
30.90€
Ex Tax:25.33€