![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: tsr12465
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 6,5 V / DC
..
12.90€
Ex Tax:10.57€
Model: tsr12450
This is a DC/DC-converter with 5V output voltageIt can be used (as a replacement for the fixed voltage pin-compatible 7805) There is no heatsink is necessary. Compared to the Recom-type, this type has a higher input voltage.
Technical data according to the manufacturer
Output voltage: 5 V / DC
Ou..
12.90€
Ex Tax:10.57€
Model: tsr124120
This is a DC/DC-converter with 12V output voltageAttention: not for the use on the FlightControl board - there a 5V type is used!
Technical data according to the manufacturer
Output voltage: 12 V / DC
Output current: 1 A
Type: Traco TSR1-24120
Pitch: 2.54 mm
Input voltage range: 15 - 36V / DC..
13.90€
Ex Tax:11.39€
Model: verteileroktox
This is a Okto XL power distribution printed circuit board for 8 BL-Ctrls. The use reduces the wiring effort in building a OktoKopters significantly.The 8 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus.You can assemble optional cooling plates. (included in..
38.90€
Ex Tax:31.89€
Model: f550zen
Mounting bracket for Zenmuse H3-3D to F550..
18.90€
Ex Tax:15.49€
Model: f450zen
Mounting bracket for Zenmuse H3-3D to F450..
9.90€
Ex Tax:8.11€
Model: ec5para
EC5 Parallel Battery Harness 10AWG..
13.90€
Ex Tax:11.39€
Model: xbeepro
Mikrokopter Xbeepro set for communication PC-Mikrokopter
this set is pre assembled for you :
set contains :• 2x XBeePro 2,4 ghz 60Mw Modules Pre programmed to work with Mikrokopter with unique ID• 1 x XB USB explorer board for PC• 1 x Convertor board For Mikrokopter• Set is pre build and tes..
159.90€
Ex Tax:131.07€
Model: ledflexbl
Water resistant LED strip on a flexible printed circuit board. Light up your Mikrokopter for the dark winter evenings! This can be supplied in multiple conjoined Units of 6LED"s/10cm up to a single Length of 30LED"s/50cm. The LED strips can be cut down to a minimum of 5cm lengths hosting 3 LED"..
4.90€
Ex Tax:4.02€
Model: cs8cmp
Description
CINESTAR 8 CAMERA MOUNT PLATE:
1 - C8 Camera Mount Plate
5 - Press Nuts
7 - BH M3x6 Screws..
48.90€
Ex Tax:40.08€
Model: cs8gnm
Description
CINESTAR GPS/NAVI MOUNT:
2 - GPS/NAVI Mount
4 - Press Nuts
4 - Clamps
4 - BH M3x35 Screws..
55.90€
Ex Tax:45.82€
Model: cs8sam
Description
CINESTAR SMALL ACCESSORY MOUNT:
2 - Small Carbon Accessory Mount..
15.90€
Ex Tax:13.03€