![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: verteilerhexax
This is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring effort in building a HexaKopters significantly. The 6 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the ..
36.90€
Ex Tax:30.25€
Model: tubeho16
CF-tube holder 25-16
Material: aluminium 6061-T6
Total weight: 32.5g
Used aluminium blot
(2)One pair..
46.90€
Ex Tax:38.44€
Model: verteilerouadr
This is a power distribution printed circuit board for 4 BL-Ctrls to build a Quadro XL. The use reduces the wiring effort in building significantly. The 4 BL-Ctrl fit right into the distributor board. Also this board distributes the I2C data bus. A Molex-connector can be assembled to connect the Fli..
34.90€
Ex Tax:28.61€
Model: mitn6mm3538
MK propeller mount with 6mm hub (M6 winding). Suitable for MK3538.Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).
Delivery
1 propeller mount M6 and additional mounting material (see photo)..
8.90€
Ex Tax:7.30€
Model: wnkeladapter
With this adapter you can achieved a small tilt in mounting a motor. This produces a better yaw behavior, if your MikroKopter has a large diameter and/or larger mass in the outer regions.
delivery
2 adapters and screws for motor mounting...
7.90€
Ex Tax:6.48€
Model: mkusb
MKUSB: USB adapter kit for the MikroKopter (SMD preassembled)This adapter converts USB to serial.It has 2x 10pin connector for direct connection to FlightCtrl, NaviCtrl, MK3Mag or BL-Ctrl.By placing a jumper, the target board can be supplied with 5V if needed.With the MK-USB you can program all cont..
18.90€
Ex Tax:15.49€
Model: combicp
This Combi Centerplate can be used to build a Quadro, Y6, Hexa, Hexa (coaxial), Octo or Octo (coaxial) frame- not for a Okto2 frameYou will need two of these Combi Centerplates for a frame.
Technical data
Diameter: about 18cm
Color: black
Material: GFK
Weight: 28g
Scope of Delivery
1 piece..
23.90€
Ex Tax:19.59€
Model: daempferm3x8
Vibration dampener (rubber)
Technical Data
Size: M3 x 8mm
color: black
Material: Body: Natural rubber (NR), metal parts: galvanized steel
Weight: approx 2g/Piece
delivery
4 Pieces..
6.90€
Ex Tax:5.66€
Model: daempferm3x15
Vibration dampener (rubber)
Technical Data
Size: M3 x 15mm
color: black
Material: Body: Natural rubber (NR), metal parts: galvanized steel
Weight: approx 3g/Piece
delivery
4 Pieces..
6.90€
Ex Tax:5.66€
Model: m3x16stoppmutt
Screw M3x16 and lock nut M3
Technical Data
Size: M3x16mm
material: metal
delivery
20 screw M3x16, 20 lock nuts..
5.90€
Ex Tax:4.84€
Model: mutterm3schw
M3 - hex nut similar to DIN 34,814 of PA6.6 black
delivery
10 pieces..
1.90€
Ex Tax:1.56€
Model: gpsshield11
This cover made out of PCB-material is attached directly to the MKGPS board. The side panels are easily connected using solder. This is also the ground plane for the GPS antenna. This increases the GPS reception. The signal to noise ratio for the rest of the electronics in MikroKopter is increased. ..
15.90€
Ex Tax:13.03€