![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: FF-MXL-MA
MōVI XL features a 6 bolt pattern allowing users to mount the gimbal to a variety of devices. The MōVI XL to Mitchell Adapter adapts the 6 bolt pattern to a standard Mitchell Mount. This can be used with or without the MōVI XL quick release. Freefly sets our gimbals up to use the Quick Release sys..
596.90€
Ex Tax:489.26€
Model: FF-MXL-RS
The Rod Support adds an additional point of contact between your dovetail plate and the 19mm rods to increase the rigidity of the camera package for increased performance. This support allows for higher stiffness settings which leads to better shot quality.Features:
19mm tube mounts
ARRI dovetail..
159.90€
Ex Tax:131.07€
Model: FF-MXL-PNL50
MōVI Users like to customize and modify their rigs for their specific applications. This means mounting a variety of accessories to the 50mm, 30mm, 25mm, 19mm and 15mm carbon tubes. We have created the Pop-N-Lock line of quick release to enable users to quickly set up their rigs with a variety of li..
159.90€
Ex Tax:131.07€
Model: FF-MI
MIMIC offers precise and natural control of the MōVI Pro. Using Freefly’s innovative MIMIC technology, the camera automatically and intuitively follows users movements. MIMIC features a long range 2.4 GHz frequency hopping radio system that provides users access to MōVI Pro pointing control, status ..
926.90€
Ex Tax:759.75€
Model: FF-MP-RP
Mōvi Ring Pro II is designed to allow users to create content more quickly and effectively than ever before. It features a built in stand for instant set down to allow users to rest between shots. The built in stand allows for quick setup and balancing without an accessory stand. The built in stand ..
1,025.90€
Ex Tax:840.90€
Brand: DJI
Model: DJI-CS-OMB
CrystalSky Osmo Pro/RAW Mounting Bracket is used to mount the CrystalSky Monitor to the Osmo Pro/RAW. When using this mounting bracket, it is necessary to use an Osmo Pro/RAW - Wired Video Adapter, which allows the Osmo Pro/RAW to connect to the CrystalSky monitor without Wi-Fi.
Overview
CrystalSky..
89.90€
Ex Tax:73.69€
Model: FF-MXL-LS
XL lens support allows users to rigidly tie the lens into the dovetail plate. This helps to ensure adequate performance with lenses that are sloppy / lack rigidity. The lens support mounts to the 19mm rods and features adjustable lens mounting blocks to adapt to your specific lens mount. The lens..
241.90€
Ex Tax:198.28€
Model: FF-MP-CH
MōVI Classic handle allows users to operate MōVI Pro with a handle similar to the ones used on the original MōVI. This handle enables super low shots, or shots which require a smaller operating footprint (car interior etc.). The handle is 450mm wide for a comfortable shooting position and features a..
385.90€
Ex Tax:316.31€
Brand: ImmersionRC
Model: IM-TRHV-ACCRF
Package of 3 RF cables for the TrampHV 5.8GHz vTx.
- 1x Straight bulkhead U.FL -> SMA, as shipped with the TrampHV- 1x Right-angle Bulkhead U.FL -> SMA- 1x Straight bulkhead w/two screwholes, U.FL -> SMA, as shipped with the TBS Unify Pro
All cables 1.37mm, standard length (approx. 5cm)..
13.90€
Ex Tax:11.39€
Brand: ImmersionRC
Model: IM-LAPRF1
The LapRF is a personal race timing system for FPV quads using 5.8GHz video feeds. The passing of a quad through the start/finish gate is precisely measured using the energy emitted by the 5.8GHz transmitter on the quad. Custom fully-programmable timing receivers, coupled with ImmersionRC"s timing a..
84.90€
Ex Tax:69.59€
Brand: ImmersionRC
Model: IM-TNR
Why let race directors have all the fun? The Personal Touch and Race wand (TNR) avoids dip-switch hell even in the local park!
The TNR wand allows for super easy programming of video transmitters before you launch, eliminating frequency collisions, eliminating the ‘what channel was I on last’ ques..
54.90€
Ex Tax:45.00€
Brand: ImmersionRC
Model: IM-VO-150
For full product specifications, refer to the Immersion RC Product Page:
Vortex 150 Mini Product Page
* The EU Version is identical to the International, and USA versions, with one exception. The firmware is region-locked to prevent transmission outside of the EU ISM band. All ImmersionRC/FatShark c..
230.90€
Ex Tax:189.26€