Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
17.13€
Brez DDV:17.13€
Model: MULTITOOL-NINJA
This tool will allow you to test your LiPos from 1S to 12S as well as your servos if you are a fan of flying wings.
The tester is equipped with two plugs for servos (1 input / 1 output), pins for balance plugs for your LiPo batteries, a wheel for scrolling through the menu and a color screen.
This m..
17.95€
Brez DDV:17.95€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
32.70€
Brez DDV:32.70€
Model: OM14601
The R5 2207 motor is specially designed for Race drones such as the Mach R5 Sport.
This 2050KV motor from Iflight is made of high quality materials and new N52H curved arc magnets have been introduced to significantly reduce the response time of the motor.
Specifications
KV: 2050KV
Weight(incl..
24.51€
Brez DDV:24.51€
Model: LIPO-PAD-DFR
Just as grippy as their predecessors, these 3 lipo pads are even thinner and lighter.
They allows you to keep the battery stationary while further reducing the overall weight of your drone.
Specifications
Dimensions : 100*50*1.5mm
Weight : ~8.4g (1pc)
Included
3x Lipo pad
Note : Battery ..
8.93€
Brez DDV:8.93€
Model: APEX-EVO-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna or Moonlight antenna on the ImpulseRC APEX EVO frames.
Specifications
Material : TPU
Compatibility : Apex EVO frames
Weight : ~1.4g
Included
1x TPU mount
Voir plus..
4.02€
Brez DDV:4.02€
Model: ANT-T-UFL-DFR
UFL 2.4GHz T antenna for ELRS receivers.
A small notch on the T allows a Rilsan cable to be passed through to better fix the antenna on the droine.
Available in two sizes, 50mm or 100mm.
Specifications
Connector : UFL
Size : 50mm or 100mm (optionnal)
Weight : 1.3g (50mm) / 1.6g (100mm)
Inclu..
4.02€
Brez DDV:4.02€
Model: T015521
Bullet Points
Improved circuit design
High frequency stability
Outstanding performance
Long Range capabilities
Included
1x ELRS True Diversity receiver 2.4GHz
2x Antennas
Specifications
MCU: ESP32-Pico D4
Receiver Type: Gemini/True Diversity
Firmware: iFlight 2.4GHz 250mW Diversity RX(2.4..
31.89€
Brez DDV:31.89€
Model: ES666
The Sequre ES666 screwdriver is the smart and innovative tool you"ve been missing. This multifunctional electric screwdriver supports sensing, fixed and automatic modes, which breaks traditional concepts.
The ES666 has many features such as angle detection, sensitivity adjustment, front-facing LEDs,..
44.18€
Brez DDV:44.18€
Model: TAA15506S15X6
New range of Tattu lipo batteries with the R-Line 5.0 Version!
This latest update brings more punch, lower internal resistance as well as less weight. The fifth R-Line version also uses the new Tattu "Al Boehmite" technology, offering a significant improvement in overall performance and continuous p..
41.72€
Brez DDV:41.72€
Model: TAA8506S15X3
Tattu R-Line Version 5.0 850mAh 14.8V 150C 6S1P LiPo battery pack is the updated version of R-Line series. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V5 definitely dominate all your races.
Li-Po (Lithium Polymer) batteries and more generally all batteries, must be ..
31.07€
Brez DDV:31.07€
Model: HERO-UNIV-BICOLOR-FREESTY-TPUBYDFR
Universal mount for GoPro Hero 9-12 made of TPU.
Specifications
Simple to install
TPU flexible material improving durability and protection
Compatibility : GoPro Hero 9-12
Weight: ~29g
Included
1x TPU mount
Voir plus..
22.05€
Brez DDV:22.05€