%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: VALKYRIE-MINI-O3-TPUBYDFR
Support for mounting an O3 antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
3.20€
Ex Tax:3.20€
Model: VALKYRIE-MINI-GOPRO-TPUBYDFR
Support to install a GoPro on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~8.3g (with screw and nut)
Included
1x TPU mount
1x Screw
1x Nut
Voir plus..
4.84€
Ex Tax:4.84€
Model: VALKYRIE-MINI-O3-DJI-TPUBYDFR
Support for mounting an O3 camera or DJI FPV camera on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~2g (2pcs)
Included
1x Set of 2pcs
Voir plus..
3.20€
Ex Tax:3.20€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
7.30€
Ex Tax:7.30€
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
17.13€
Ex Tax:17.13€
Model: MULTITOOL-NINJA
This tool will allow you to test your LiPos from 1S to 12S as well as your servos if you are a fan of flying wings.
The tester is equipped with two plugs for servos (1 input / 1 output), pins for balance plugs for your LiPo batteries, a wheel for scrolling through the menu and a color screen.
This m..
17.95€
Ex Tax:17.95€
Model: VIFLY-TOOTHSTOR
The ToothStor from Vifly is a charger intended for 2S batteries.
You can charge up to four batteries equipped with BT3.0 or XH2.54 connectors simultaneously.
In addition to charging the battery at full voltage, you will be able to charge or discharge it to storage voltage for long-term storage.
The ..
32.70€
Ex Tax:32.70€
Model: OM14601
The R5 2207 motor is specially designed for Race drones such as the Mach R5 Sport.
This 2050KV motor from Iflight is made of high quality materials and new N52H curved arc magnets have been introduced to significantly reduce the response time of the motor.
Specifications
KV: 2050KV
Weight(incl..
24.51€
Ex Tax:24.51€
Model: LIPO-PAD-DFR
Just as grippy as their predecessors, these 3 lipo pads are even thinner and lighter.
They allows you to keep the battery stationary while further reducing the overall weight of your drone.
Specifications
Dimensions : 100*50*1.5mm
Weight : ~8.4g (1pc)
Included
3x Lipo pad
Note : Battery ..
8.93€
Ex Tax:8.93€
Model: APEX-EVO-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna or Moonlight antenna on the ImpulseRC APEX EVO frames.
Specifications
Material : TPU
Compatibility : Apex EVO frames
Weight : ~1.4g
Included
1x TPU mount
Voir plus..
4.02€
Ex Tax:4.02€
Model: ANT-T-UFL-DFR
UFL 2.4GHz T antenna for ELRS receivers.
A small notch on the T allows a Rilsan cable to be passed through to better fix the antenna on the droine.
Available in two sizes, 50mm or 100mm.
Specifications
Connector : UFL
Size : 50mm or 100mm (optionnal)
Weight : 1.3g (50mm) / 1.6g (100mm)
Inclu..
4.02€
Ex Tax:4.02€
Model: T015521
Bullet Points
Improved circuit design
High frequency stability
Outstanding performance
Long Range capabilities
Included
1x ELRS True Diversity receiver 2.4GHz
2x Antennas
Specifications
MCU: ESP32-Pico D4
Receiver Type: Gemini/True Diversity
Firmware: iFlight 2.4GHz 250mW Diversity RX(2.4..
31.89€
Ex Tax:31.89€