Iskalni kriterij
Izdelki, ki se ujemajo s kriterijem iskanja
Blagovna znamka: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
61.39€
Brez DDV:61.39€
Blagovna znamka: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
102.38€
Brez DDV:102.38€
Model: FY-G4Plus
Product Highlights• 3-Axis Motorized Gimbal• Supports Phones Up to iPhone 6 Plus• Fixed Axes and Pan/Tilt Following Modes• 320° Pan/Tilt Rotation• 100° Roll Rotation• Single-Button Operation• Battery Level Indicator Light• Optional Gimbal Remote Control• Four Batteries and Charger IncludedThe Feiyu..
190.08€
Brez DDV:190.08€
Model: H9-TWST-4-8-16
Premium Gorilla Glass High Quality Adhesive ND4 / ND8 / ND16 Filter Set for GoPro Hero 9 and Hero 10 made of premium optical glass. These filters snap on and off without tools, replacing the clear lens coating, while maintaining the seal.
ND transmission comparison:
ND4 (ND 0.6) 25% transmission ..
54.02€
Brez DDV:54.02€
Blagovna znamka: GoPro
Model: GP9-ND8-FILTER-GORILLA
High quality, stick-on neutral density filter for GoPro Hero 9/10/11 made from top quality optical glass. These filters snap on and off without tools, replacing the clear lens coating on the Hero 9/10/11, while maintaining a seal.
..
54.02€
Brez DDV:54.02€
Blagovna znamka: GoPro
Model: GP9-ND32-FILTER-GORILLA
High quality, stick-on neutral density filter for GoPro Hero 9/10/11 made from top quality optical glass. These filters snap on and off without tools, replacing the clear lens coating on the Hero 9/10/11, while maintaining a seal.
..
48.28€
Brez DDV:48.28€
Blagovna znamka: GoPro
Model: H9-TWST-4-3
Premium Gorilla Glass High Quality Adhesive ND4 Filter Set for GoPro Hero 9/10/11 made of premium optical glass. These filters snap on and off without tools, replacing the clear lens coating, while maintaining the seal.
ND transmission comparison:
ND4 (ND 0.6) 25% transmission (cloudy, overcast)
..
48.28€
Brez DDV:48.28€
Blagovna znamka: Mauch Electronic
Model: MAU2-001
50A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U.
Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BEC..
45.00€
Brez DDV:45.00€
Blagovna znamka: Mauch Electronic
Model: MAU2-040
This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL - Series.
REM: This cable is standard deliverred together with any BEC or Sensor Hub X2-V2 ..
6.48€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-042
This cable is for the PL 2-6S series BEC"s to connect to Pixhawk 2.1 or any flight controller with Molex / Clik-Mate / 2.0mm / 6p connector.
L = 150mm ..
6.48€
Brez DDV:6.48€
Blagovna znamka: Mauch Electronic
Model: MAU2-041
This cable is for the PL 2-6S series BEC"s to connect to any flight controller with DF13-6p connector.
For example:
Pixhawk 1, APM... etc.
L = 150mm ..
4.84€
Brez DDV:4.84€
Blagovna znamka: Mauch Electronic
Model: MAU2-004
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U.
Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
This Sensor board connects directly to any Premium-Line BE..
53.20€
Brez DDV:53.20€