![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: part36
Osmo part 36
Replaces the Triple Mount Suction Cup Base on the Vehicle Mount. 1/4" screw thread allows users to attach different tools and accessories, like the Extension Rod. Note: When used with a camera, make sure that the base is unlocked to prevent scratching the camera...
49.90€
Ex Tax:40.90€
Model: part35
Osmo part 35
Replaces the Articulating Locking Arm on the Vehicle Mount. Can also be used with the Tripod to provide more stable support for the Osmo...
39.90€
Ex Tax:32.70€
Model: p4nd16
Specifically made for the DJI Phantom 4, this ND16 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera"s aperture, exposure time and sensor sensitivity settings. Put more simply, the ND16 filter helps avo..
29.90€
Ex Tax:24.51€
Model: p4nd8
Specifically made for the DJI Phantom 4, this ND8 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera"s aperture, exposure time and sensor sensitivity settings. Put more simply, the ND8 filter helps avoid..
29.90€
Ex Tax:24.51€
Brand: Yuneec
Model: LRKITYUN
Product Description
This kit is designed for all Yuneec quadcopters using the ST-10 and ST-10+ controller for ranges of 4,000 ft. Remember these antennas need to have the tips pointed at the quadcopter. What is included in this kit:
1x u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz r..
84.90€
Ex Tax:69.59€
Model: LRKITI1P3
Product Description
this kit includes
1. redesigned antenna array with LHCP + RHCP helix 10.5dBi gain, 60 degrees beamwidth (measured at half power). 2. 3d printed plastic mount3. 2 mmcx to rp-sma female pigtail cables to modify the radio control.
Distances of 10km with exceptionally good reception ..
84.90€
Ex Tax:69.59€
Model: LRKITP3S
Product Description
This is the new and improved kit for PH3 Standard. The 5.8ghz has been increased to 14.5dBi so it’s quite directional with 38 degrees beam width the 2 2.4ghz helix antennas for rc control are 10.5dBi and have a 55 degrees beam width It comes with 3 u.fl cables to rp-sma female an..
48.90€
Ex Tax:40.08€
Model: ec5female
For those who doesnt need whole SET, but just for batteriesEC5-Goldconnector-Set Female 5mm
- Perfect choice for GensAce lipos- EC5 system suitable for up to 120A- 5mm gold connector (2x female)- plastic housing..
1.90€
Ex Tax:1.56€
Model: FY-WRC
Wireless RemoteThis small wireless remote controller is designed for Feiyu Tech WG or G4S gimbal.Allows you to easily change your operation mode and have full control over the movement of the gimbal.This remote can prove to be very useful when you are mid filming and want to change operation mode wi..
34.90€
Ex Tax:28.61€
Model: FY-G4Plus
Product Highlights• 3-Axis Motorized Gimbal• Supports Phones Up to iPhone 6 Plus• Fixed Axes and Pan/Tilt Following Modes• 320° Pan/Tilt Rotation• 100° Roll Rotation• Single-Button Operation• Battery Level Indicator Light• Optional Gimbal Remote Control• Four Batteries and Charger IncludedThe Feiyu..
231.90€
Ex Tax:190.08€
Model: osmopart51
The DJI Battery (10 PIN-A) to DC Power Cable is used to connect a DJI device with a DC port and the Phantom 4 Intelligent Flight Battery (model PH4-5350mAh-15.2V) as a power supply for the DJI device. DJI Battery (10 PIN-A) to DC Power Cable User Guide..
6.90€
Ex Tax:5.66€
Brand: DJI
Model: osmocase
Osmo Transport Case ProThis case provides the best B&W quality and was designed and manufactured for your DJI Osmo and accessories.The hard-foam inlay offers space for your DJI Osmo, two batteries, the Smartphone Holder and the charger.This case is the most compact and safe transport and storage pos..
36.90€
Ex Tax:30.25€