![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: DJI
Model: a3up
The A3 can be upgraded to A3 Pro by using two A3 Upgrade Kits. The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure du..
561.90€
Ex Tax:460.57€
Brand: Gremsy
Model: gr-qr
Gremsy Circular Quick Release
This lightweight yet rigid quick release allows to disconnect and connect the gimbal in a matter of seconds. By using the safety button, it can provide additional security to the system. Moreover thanks to hollow and circular design, you can easily put the wires go thro..
156.90€
Ex Tax:128.61€
Brand: Gremsy
Model: gr-can
CanLink features a can bus adapter coupled with a slip ring and in combination with the gStabi controller offers the ability to communicate with a DJI flight controller (Naza, Wookong, A2) via CANBUS to correct horizon drift.
Package includes:
Qty 1 – Slip Ring
Qty 1 – Connector Board_Inside
Qty 1 ..
226.90€
Ex Tax:185.98€
Model: insp-car-ch
The Car Charger for Inspire 1 is used to charge the Intelligent Flight Battery or remote controller through a car"s cigarette lighter port. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette li..
109.90€
Ex Tax:90.08€
Model: osmomicfl
The FM-15 Flexi Microphone can be plugged into the Osmo’s external microphone input. The microphone is omnidirectional and comes with a flexible stem. Specifications Sensitivity -32 ±3 dB (0 dB=1 V/Pa) Frequency Response 100 -10000 Hz Signal-to-Noise Ratio 60 dBA Pin Diameter 3.5 mm Length 88 mm W..
10.90€
Ex Tax:8.93€
Model: pixtele
Improving range of telemtrz for 3 times or more.Right-angle SMA connector with a piano-wire whip, flexible enough to survive some serious abuse...
5.90€
Ex Tax:4.84€
Model: osmopart37
Osmo X5 Adapter Quick Start Guide
Start of delivery on Monday/Tuesday 6./7. june 2016
Note: Connect the communication ports on the Focus Remote Controller and the Osmo - X5 Adapter using the DJI Focus - Osmo Pro/RAW Adaptor Cable. Then, you can use the DJI Focus to control the aperture and focus of..
59.90€
Ex Tax:49.10€
Brand: Connex
Model: con-pros-tx
Amimon CONNEX ProSight - Latency-free 5GHz HD digital FPV System with camera (720p)
Preorders will be possible from June, 1st on. Delivery starts in July as stated by the manufacturer.
This is the transmitter only as a spare part for the Amimon ProSight FPV set.
If u want to be subdealer for this pr..
145.90€
Ex Tax:119.59€
Brand: Connex
Model: con-pros-cam
Amimon Connex ProSight - Digital HD FPV Camera 720p native 60 FPS
Features:
Native 720p60 Support
Wide Field Of View - 126 degrees
Custom White Balance Settings
Zero Delay Latency
Compatible with exiting ProSight Tx/Rx with FW upgrade
Default Lens 1.49mm
No HDR
In the Box: 1x Camera
If u want to ..
96.90€
Ex Tax:79.43€
Model: zaxis
The Osmo Z-Axis can significantly reduce vertical shaking from natural arm movements when walking or jogging. It is compatible with the Zenmuse X3 gimbal and camera. Note:
The Z-Axis is NOT intended for action sports that involve extreme movement or to be used with other non-DJI devices.
The Z-A..
149.90€
Ex Tax:122.87€
Model: part50
Osmo part 50
The DJI Battery (2 PIN) to DC Power Cable is used to connect a DJI device with a DC port and one of the following DJI Intelligent Batteries as a power supply for the device. Supported DJI Intelligent Battery Models PH3-4480mAh-15.2V (Phantom 3 Intelligent Flight Battery) TB47/TB48 (In..
6.90€
Ex Tax:5.66€