![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-013
The Sensor Hub X8 collects the current measurements from up to eight Power-Cube current sensors. The currents are summed up and passed to the Pixhawk flight controller via the Power-Cube power supply. The voltage measurement of the LiPo packs is measured separately by the Power-Cube.
An OLED display..
199.90€
Ex Tax:163.85€
Model: 7inchalmiauto
Description:7 Inch TFT LCD Screen FPV Monitor LT5802S 5.8G 40CH LED Backlight Multicopter with Build-in Battery Feature:1. Battery operation state OSD display: RSSI signal; index; channel indication.2. Automatic signal search.3. Support Chinese and English menus.4. Format: JPEG, AVI.5. Built-in dual..
121.90€
Ex Tax:99.92€
Model: FF-MXL-QR
MōVI XL quick release kit allows users to quickly mount / dismount the gimbal from a variety of platforms. The male portion of the quick release mounts to MōVI XL, and the female portion mounts to whatever platform you intend to mount MōVI XL to (Car, boat, Technocrane, Jib, Horse, Camel). The qui..
596.90€
Ex Tax:489.26€
Model: FF-MXL-450
Ultra rigid 19mm x 450mm Carbon Lens Rod ensures that your camera and lens combination is as stiff as possible. Stabilizers perform the best when the camera and lens are rigidly mounted and move as one solid unit with no play of slop. Our 19mm carbon rods are a optimal mixture of lightweight and r..
97.90€
Ex Tax:80.25€
Model: FF-MXL-300
Ultra rigid 19mm x 300mm Carbon Lens Rod ensures that your camera and lens combination is as stiff as possible. Stabilizers perform the best when the camera and lens are rigidly mounted and move as one solid unit with no play of slop. Our 19mm carbon rods are a optimal mixture of lightweight and r..
75.90€
Ex Tax:62.21€
Model: FF-MXL-CP
XL Camera plate allows users to securely mount their camera to MōVI XL dovetail. It features a ARRI compatible lightweight design and adaptable camera mounting slots to accommodate a variety of camera bolt spacing and sizes. The system features a clamping lever to lock the plate to the dovetail as..
540.90€
Ex Tax:443.36€
Model: FF-MP-13
Use this accessory to mount two accessories equipped with 13mm plugs to a single 13mm mount point. Great for mounting a monitor and video receiver on the MōVI Controller, Pilot, MōVI Ring Pro, Adjustable Monitor Mount Quick Release, Low Profile Handle, etc.
Features:
Compatible with all Freefly ..
96.90€
Ex Tax:79.43€
Brand: DJI
Model: DJI-IN2-NC
SERVICE PART: DJI Inspire 2 - Nose Cover (Part 1)..
13.90€
Ex Tax:11.39€
Brand: DJI
Model: DJI-IN2-GPSC
SERVICE PART: DJI Inspire 2 - GPS Cover (PART 11)..
3.90€
Ex Tax:3.20€
Brand: DJI
Model: DJI-RG-P1
DJI Goggles Racing Edition - Pagoda Antenna (SMA Interface) (Part 1)
The Pagoda Antenna (SMA interface) is a 5.8 GHz Left Hand Circular Polarized (LHCP) omnidirectional antenna, which can be connected to Goggles RE"s SMA interface to obtain better result on signal reception by working with the built..
10.90€
Ex Tax:8.93€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
52.90€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
55.90€
Ex Tax:45.82€