![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: T-Motor
Model: TM-A-60HV-2
T-motor Alpha 60A HV Esc, now you can install your own firmware with DATALINK+Wifi programmer. (default firmware installed)..
113.90€
Ex Tax:93.36€
Brand: T-Motor
Model: TM-A-80HV
T-motor Alpha 80A HV Esc, now you can install your own firmware with DATALINK+Wifi programmer...
133.90€
Ex Tax:109.75€
Model: SDI-SDI
OVERVIEW
Upgrade your short BNC cable use with the 3G-SDI–rated. This 60cm long cable"s right-angle connectors and thin, flexible 2.5mm diameter design both help to create compact, tidy cable loops.
..
27.90€
Ex Tax:22.87€
Brand: DJI
Model: DJI-IN2-SR
DJI Inspire 2 - Remote Controller Support Rig The Inspire 2 Remote Controller Support Rig attaches to a user"s abdomen, reducing the weight of the remote controller and making it easier to hold for long periods of time. In the box: 1x Support Rig..
19.90€
Ex Tax:16.31€
Brand: DJI
Model: DJI-CE-MH
Overview
Mobile devices can be mounted to the Cendence Remote Controller via the Cendence Mobile Device Holder. Devices up to 170mm wide are supported.
Compatibility
Cendence Remote Controller..
35.90€
Ex Tax:29.43€
Brand: Gremsy
Model: GR-H16-CW
H16 - COUNTER WEIGHT MOUNTING SET
IN THE BOXH16 - Counter Weight Mounting x1H16 - Pan Counter Weight Mounting x1Counter Weight 150g x2Counter Weight 300g x2M3 x 35 Screws x2..
206.90€
Ex Tax:169.59€
Brand: DJI
Model: DJI-CA-X7
DJI Care Refresh is an effective, comprehensive warranty for DJI products, offering you greater peace of mind every time you fly. Click here.Please Note:For a small additional charge, DJI Care Refresh offers up to two replacement units within one year. Each time you request a replacement, you’ll rec..
519.90€
Ex Tax:426.15€
Brand: Mauch Electronic
Model: MAU2-054
Input voltage 4-20S, max. 85V !
Power-Cube 4 / V2 with 4 outputs 3x 5.3V / 10A + 1x 12.0V / 10A
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2, 3 or 4 -> Output 1 can"t be changed and must remain..
399.90€
Ex Tax:327.79€
Brand: Mauch Electronic
Model: MAU2-053
Input voltage 4-20S, max. 85V !
Power-Cube 3 / V2 with 3 outputs 2x 5.3V / 10A + 1x 12.0V / 10A
REM: The output voltage can be customized. Please mention in the required Voltage at NOTE in order, if you need a different output voltage on output 2, 3 -> Output 1 can"t be changed and must remain 5.3V..
319.90€
Ex Tax:262.21€
Brand: Mauch Electronic
Model: MAU2-017
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protec..
94.90€
Ex Tax:77.79€
Brand: Mauch Electronic
Model: MAU2-010
This sensor hub is to connect two PL-xxx current sensors in parallel. The current of both sensors will be summarized and passed to the FC. The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace ex..
54.90€
Ex Tax:45.00€