%20(1)-250x250w.jpg "DJI Avata 2 Pro-View Combo")
![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Brand: Mauch Electronic
Model: MAU2-025
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 5.0V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x..
188.44€
Ex Tax:188.44€
Brand: Mauch Electronic
Model: MAU2-024
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 1x 12.0V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 66mm x 1..
147.46€
Ex Tax:147.46€
Brand: Mauch Electronic
Model: MAU2-076
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
47.46€
Ex Tax:47.46€
Brand: Mauch Electronic
Model: MAU2-074
100A - Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
45.00€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
147.46€
Ex Tax:147.46€
Brand: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
61.39€
Ex Tax:61.39€
Brand: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
102.38€
Ex Tax:102.38€
Brand: Mauch Electronic
Model: MAU2-084
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V .
..
43.36€
Ex Tax:43.36€
Brand: Mauch Electronic
Model: MAU2-085
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get"s only warm during operation (LDO only 0.35V dropout voltage).
Input and output is protected by Panasonic FC / FM capacitors.
Input 4-14S LiPo / max. 60V.
Ou..
45.82€
Ex Tax:45.82€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
53.20€
Ex Tax:53.20€
Brand: Mauch Electronic
Model: MAU2-072
50A - Current measurement sensor board, based on Allegro Hall Sensor ACS-50U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power th..
45.00€
Ex Tax:45.00€
You have reached the end of the list.