![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: UNI-140A-4MM2
The small powerful RC telemetry sensor measures voltage, current, height, power, capacity and speed in a model and can be transferred to the transmitter via telemetry. Full support for telemetry of Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS and FrSky.
The Unisens E is a pure telem..
71.90€
Ex Tax:58.93€
Model: UNI-140A-6MM
The small powerful RC telemetry sensor measures voltage, current, height, power, capacity and speed in a model and can be transferred to the transmitter via telemetry. Full support for telemetry of Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS and FrSky.
The Unisens E is a pure telem..
71.90€
Ex Tax:58.93€
Brand: Mauch Electronic
Model: MAU2-076
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
57.90€
Ex Tax:47.46€
Brand: Mauch Electronic
Model: MAU2-074
100A - Current measurement sensor board, based on Allegro Hall Sensor ACS-100U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
54.90€
Ex Tax:45.00€
Brand: Mauch Electronic
Model: MAU2-023
Mauch 4-14S HYB-BEC 5.30V 3A Output Suit Pixhawk 2 Backup BEC
Mauch BEC"s are built the the highest quality and each unit is carefully tested before shipping. These are made to connect directly to the Pixhawk 2 Autopilot as a backup BEC. Due to the highest quality components the BEC runs only warm u..
179.90€
Ex Tax:147.46€
Brand: Mauch Electronic
Model: MAU2-021
Input 4-14S LiPo / max. 60V.
Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 29mm x 13mm / 26..
74.90€
Ex Tax:61.39€
Brand: Mauch Electronic
Model: MAU2-022
Input 4-14S LiPo / max. 60V.
Output 2x 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p.
Blue power "ON" LED.
59mm x 48mm x 13mm / 41g w..
124.90€
Ex Tax:102.38€
Brand: Futaba
Model: fu-lipo
Futaba upgrade to Lipo Battery for SG14.
EU and UK plug for Charger included...
60.90€
Ex Tax:49.92€
Brand: T-Motor
Model: mn4014
Specifications for MN5212 motor
KV................................................................................................................400
Configu ration...................................................................................18N24P
Stator Diameter.................................
107.90€
Ex Tax:88.44€
Model: 14AWG
14 AWG silicone cable - 1 metre..
2.90€
Ex Tax:2.38€
Model: XT60M-14AWG
Male XT60 connection cable to connect a female XT60 Lipo battery.
This 10cm long cable allows you to connect your distribution card to your XT60 female lipo battery.
Specifications
plug : ..
2.90€
Ex Tax:2.38€