![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Model: aninbo
Anti interference board Zenmuse h3-3d..
15.90€
Ex Tax:13.03€
Model: vpro2204
kV(RPM/V): 2300kV
Lipo Cells:3~4S
Max Current:126.5W
Max Amps: 11.5A
No Load Current: 0.6A/10V
Internal Resistance: 0.125 ohm
Number of Poles:12N/14P
Dimensions(Dia.xL): 22x4mm
Motor Shaft: 3mm
Prop Shaft:5mm
Weight: 24g
Bolt Hole Spacing: 12x16mm,16x19mm
Lamination Thickness: 0.2mm
Magnets:N45SH
..
15.90€
Ex Tax:13.03€
Brand: T-Motor
Model: u7propadaptccw
NEW unbreakable and the best prop adapter for KW12 / U7 motors, this adapter will not let you down on the field.
6mm shaft.
delivery 1 piece CCW..
7.90€
Ex Tax:6.48€
Brand: T-Motor
Model: u7propadapt
NEW unbreakable and 6mm longer prop adapter for U7 / KW12 motors, this adapter will not let you down on the field. 6mm shaft. Now it fits to all wooden/plastic props.
You can buy this prop adapters only at Kopterworx, exclusive from T-motor.
delivery 1 pair:1x CW + 1x CCW..
14.90€
Ex Tax:12.21€
Brand: ImmersionRC
Model: vortexesc
Using the latest FET and driver technology, ImmersionRC have created an ESC which is only 9.4mm wide. This ESC uses a high-end 32-bit processor.
Can be used to replace a damaged ESC on the ImmersionRC Vortex racing quadcopter...
26.90€
Ex Tax:22.05€
Brand: Connex
Model: con-mini
Additional ground end / receiver for Amimon Connex Mini. .In the Box:
Ground Unit (receiver)
Antennas and cables
Amimon"s CONNEX provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!Th..
1,403.90€ (From 37.36€ monthly)
Ex Tax:1,150.74€
Model: mav-prop
Spare Mavic - 8330 Quick-release Folding Propellers..
9.90€
Ex Tax:8.11€
Brand: Mauch Electronic
Model: MAU2-078
200A - Current measurement sensor board, based on Allegro Hall Sensor ACS-200U.
The voltage reading of the LiPo is optimised for up to 14S LiPo packs.
This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section.
The BEC will also power ..
64.90€
Ex Tax:53.20€
Model: ins-m2m4-esc
Original Inspire 1 PRO Motor with adapter for motors M2 and M4 with ESC included.
DJI Inspire 1 V2.0 / Pro / RAW..
85.90€
Ex Tax:70.41€
Model: ins-m2-m4
Original Inspire 1 PRO Motor with adapter for motors M2 and M4.
DJI Inspire 1 V2.0 / Pro / RAW..
49.90€
Ex Tax:40.90€
Model: ins-lef-arm
Inspire 1 auxiliary LEFT arm component PART 11..
23.90€
Ex Tax:19.59€
Brand: Gremsy
Model: GR-FDCC
T1/T3 - Flir Duo Pro R Control Cable is used to connect:
- PWM1 and PWM2 Remote Control
- Power in 12VDC
- Analog Video Output
Specification:
Cable length: 120mm
T1/T3 - Flir Duo Pro R Control Cable Diagram..
35.90€
Ex Tax:29.43€