![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: itelem
iTelemetry Dongle
Telemetry Interface for Smart-Phones and Tablets
iTelemetry Dongle, telemetry interface for smart-phones and tablets. View your model"s position on a live map, while viewing critical flight parameters; Battery status, Uplink status (EzUHF required), Altitude, Distance, etc.
Compat..
20.90€
Ex Tax:17.13€
Brand: DJI
Model: s900upplate
S900 upgrade carbon 3K plate from Kopterworx
• 2mm 3K carbon plate - more then 5 times stronger then DJI plate• No more yello or frame wobling• Adapter for Receiver (Futaba, Graupner, Frsky) or for DJI A2 antennas - 90 degree
Easy to install, u need 1 hexa screw and 10 min...
149.90€
Ex Tax:122.87€
Brand: FrSky
Model: frsky8
FrSky X8R Telemetry RX
The X8R is in a Smaller package then previous 8 channel receivers, but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors. The X8R supports 8 standard servo outputs, and you can access all 16 channels by us..
39.90€
Ex Tax:32.70€
Brand: 4Hawks
Model: DJI-lipoPH4HC
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. I..
189.90€
Ex Tax:155.66€
Brand: Gremsy
Model: gr-la-ge
The Landing gear is used with gStabi H14/H16 gimbal. This is rigid but light weight landing gear set allows you to attach to the H14/H16 at ease while providing unobstructed view from camera with full 360 degree panning.
Qty 8 – Bolt screws M3x8
Qty 1 – Landing Gear
Weight: 254g
Height: 41cm
Diam..
268.90€
Ex Tax:220.41€
Brand: Gremsy
Model: GR-H3-3S
gPower 3S - 3400mAh Battery is used to power the Gremsy H3. Each battery will run the Gremsy H3 for 3-8 hours depending on the particular setup. The battery can be charged using the gPower charger included in the H3 package...
59.90€
Ex Tax:49.10€
Model: DJI-TE-BCH
Overview
The Tello Battery Charging Hub is designed for use with Tello Flight Batteries. It can accommodate up to three Tello Flight Batteries at the same time. The Tello Battery Charging Hub charges batteries in sequence according to their voltage levels, from highest to lowest.
Tips
The Batter..
15.90€
Ex Tax:13.03€
Brand: DJI
Model: DJI-MA2-IB
This product is EOL (end of life), only available now is enterprise version:
https://www.kopterworx.com/dji-mavic-2-enterprise-intelligent-self-heating-flight-battery.html
Overview
The Mavic 2"s Intelligent Flight Battery has a capacity of up to 59.29 Wh, and provides a maximum flight time of ..
158.90€
Ex Tax:130.25€
Brand: DJI
Model: insppart42
DJI Inspire Part50 - TB47 Battery Insulation Sticker..
3.90€
Ex Tax:3.20€
Model: s800lipoh
Original lipo holder for S800...
49.90€
Ex Tax:40.90€