![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: AR0056916
DJI certified, this 120W solar panel from Zignes is intended to recharge the DJI Power 1000 station.
Benefit from a max charging power of 120W, an open circuit voltage of up to 26V and a short circuit current of 7A max.
Its IP65 certification notes its dust and water resistance. In addition, the sol..
156.90€
Ex Tax:128.61€
Model: AR0056915
Link your DJI Power charging station with a solar panel using this DJI adapter module.
It allows you to adapt up to three solar panels to recharge the DJI Power 500 or 1000.
Note: Once the module is plugged in, be sure to install the metal heat dissipation brackets to ensure safety.
If you..
63.90€
Ex Tax:52.38€
Model: AR005691
Recharge your drone"s battery quickly on your DJI Power charging station using this SDC fast charging cable.
It will allow you to charge the battery of a Mavic 3 in only around 32 minutes or 30 minutes for that of an Air 3.
Two options are offered to you, a cable intended for the batteries of the DJ..
20.90€
Ex Tax:17.13€
Model: HQ3X3X3G-AVATA 2
New HQProp 3x3x3 propellers for the DJI Avata 2.
Specifications
Propeller Diameter: 3inch
Pitch : 3
Blades : 3
Material : Poly Carbonate
Weight : 1.65g
Hub Diameter : 11.6mm
Hub Thickness : 6.6mm
Shaft :2.3/2/2.3mm
Adaptor Rings : NO
Included
2x CW..
4.90€
Ex Tax:4.02€
Model: HP0110.0030-EU
The ToolkitRC Q6AC charger has dual AC/DC inputs and four XT30/XT60 outputs.
In addition to charging your batteries, you can also use the USB-A and USB-C ports to power your tablet or laptop.
The Q6AC has a built-in fan that promises optimal heat dissipation. Its internal memory allows you to save u..
261.90€
Ex Tax:214.67€
Model: VCI-DOVE-PNP
The DOVE flying wing from Vulcan Innovation features a small fuselage and is designed to increase battery life.
It is compatible with the DJI O3 air unit and analog systems.
Its structure and the carbon fiber that composes it give it better stability and life compared to ordinary wood.
The two-color..
199.90€
Ex Tax:163.85€
Model: F4-55A-FLYTOWER
The Aikon F4 55A stack consists of an F405 flight controller and a 55A ESC.
This 30x30mm stack supports 3-6S voltage, BLHeli-S firmware and has an OSD and a 16Mb SPI blackbox.
Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it.
FC
MCU : STM32..
94.90€
Ex Tax:77.79€
Model: VALKYRIE-MINI-ANTENNA-MOON-TPUBYDFR
Support for mounting a Walksnail V2 dual antenna on the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~1.3g
Included
1x TPU mount
Voir plus..
4.90€
Ex Tax:4.02€
Model: VALKYRIE-MINI-ARM-TPUBYDFR
Arm protections for the ParallaxFPV Valkyrie Mini 3.5".
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5"
Weight : ~6.3g (4pcs)
Included
1x Set of 4pcs
Voir plus..
8.90€
Ex Tax:7.30€
Model: VALKYRIE-MINI-WHOOPKIT-TPUBYDFR
Full TPU kit for the Whoopkit of the ParallaxFPV Valkyrie Mini 3.5".
Note: These TPU parts are only intended for the Whoopkit part of the Valkyrie Mini.
Specifications
Material : TPU
Compatibility : Parallax Valkyrie Mini 3.5" frame whoopkit
Weight : ~29.4g
Included
1x TPU set
Voir pl..
20.90€
Ex Tax:17.13€
Model: LR10X5X3B-GRN
LR10x5x3 glass fiber nylon propellers from HQProp.
Specifications
Propeller Diameter: 10 inch
Pitch : 5
Blades : 3
Material : Glass Fiber Reinforced Nylon
Weight : 18.1g
Hub Diameter :16mm
Hub Thickness:10mm
Shaft :5mm
Adaptor Rings : NO
Incl..
17.90€
Ex Tax:14.67€
Model: HQPROP 65MMGR-1MM
HQProp 65mm ultralight propellers are of very good quality and allow very good performance. Durable Polycarbonate version.
Specifications
Propeller Diameter: 65mm
Pitch : 1
Blades : 2
Material : Poly Carbonate
Weight : 0.39g
Hub Diameter : 4mm
Hub Thickness: 5..
2.90€
Ex Tax:2.38€