![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: aluhold
Simple alu LCD holder for Phantom TX..
24.90€
Ex Tax:20.41€
Brand: DJI
Model: djiphhub
DJI Phantom 2 FPV Cable and Hub
A easy way to connect all your fpv gear and mini iosd , plug and play with the DJI Video link ...
13.90€
Ex Tax:11.39€
Model: phantpultnolcd
First Profi FPV pult for all Phantoms without LCD holder.
U can reach poti for tilt and batteries on the bottom...
84.90€
Ex Tax:69.59€
Brand: Graupner
Model: pultmz
Strong, light, balck mate FPV pult for New Graupner MZ edition...
139.90€
Ex Tax:114.67€
Model: tod
Toad In The Hole Quick Release V2, stronger and with safety ring.
The Toad In The Hole Quick Release is a sleek, lightweight, low-profile quick release unit, which provides an easy mount and release solution for your Movi. It allows the operator to remove the Movi from the handle assembly and atta..
347.90€
Ex Tax:285.16€
Model: movirod
MÅVI Rod Mount Adapter
This adapter attaches to the end of the adjustable camera plate and allows for an ultra lightweight and low profile 15mm rod mount. This will allow you to easily mount focus motors without adding unnecessary weight / complexity.
Specs:
Lightweight 6061-T6 aluminum rod moun..
177.90€
Ex Tax:145.82€
Brand: Gens Ace / Tattu
Model: movim5lipo
As Its not possible to get Movi original M5 batteries we found replacment - Gensace battery for Movi M5. Its even better battery, but you need to change connector to XT60 or you need to buy the cable.
NOTE: As the battery is built to be as lightweight as possible, it does not have built in safety ..
43.90€
Ex Tax:35.98€
Brand: DJI
Model: e600
The E series tuned propulsion system is the first power solution of its kind for the multirotor industry. It brings greater aerodynamic efficiency and higher thrust-weight ratio, while increasing reliability, stability and agility.
12*4.2" ROTOR
With the state of the art areodynamic efficiency..
359.90€
Ex Tax:295.00€
Model: redboard
This is Redundancy board for DJI and Pixhawk system with:
1. A3-A22. A2-WKM3. A2-Naza v24. WKM - WKM5. WKM - Naza v26. Pixhawk series - Pixhawk series7. DJI - Pixhawk series
You can manually switch between 2 controlers or if something fails on the electronic the board will switch automatic to second..
1,097.90€
Ex Tax:899.92€
Brand: Gens Ace / Tattu
Model: 60004s
Perfect baterry for Movi M5-10-15 for powering everything with RED, Alexa, ....
Details
- Product Type: lipo battery pack
- Capacity: 6000mAh
- Voltage: 14.8V
- Max Continuous Discharge: 35C (210A)
- Max Burst Discharge: 70C (420A)
- Weight: 593.50g
- Dimensions: 144*45*40mm
- Balance Plug: JST-XH..
87.90€
Ex Tax:72.05€
Model: 5to12v
5v - 12v Stepup
Clean power to drive 12v cameras
Provides clean power to drive 12v cameras from the 5v outputs of ImmersionRC A/V transmitters. Efficient step-up regulator, with almost no RF emissions. With 250mA max. output current, most typical FPV cameras can be powered.
5v-12v Input Voltage
250..
18.90€
Ex Tax:15.49€
Brand: Futaba
Model: pultfutaba10j
Strong, light, balck mate FPV pult Futaba edition...
139.90€
Ex Tax:114.67€