![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: 1060008
This camera and VTX are intended for the Cetus Lite from BetaFPV.
With a light weight of 2.47g, this part allows 800TVL resolution and good image quality thanks to the 1/4" CMOS sensor.
Get wide, sublime shots with the 1.8mm lens and 150° FOV.
* Important note: French regulations impose a maximum po..
19.90€
Ex Tax:16.31€
Model: 01060009_2--1
The C04 nano camera is intended for BetaFPV"s Cetus X.
It is equipped with an antenna as well as the integrated VTX M04.
Note: Only compatible with Cetus FC version, check that your connector has 3 pins.
* Note importante : La réglementation française impose une puissance maximum de 25mW dans la f..
53.90€
Ex Tax:44.18€
Model: 0110001147
The all-new Tinyhawk III Plus from Emax features ExpressLRS 2.4G technology, a big novelty compared to predecessors equipped with the FrSky system.
This BNF consists of the VTX HDZero Nano Lite system, TH0802 II 15000KV motors and an ExpressLRS 2.4G receiver.
Specifications
Wheelbase : 76mm
W..
288.90€
Ex Tax:236.80€
Model: 5A10088
The Happymodel Mobula8 is a 85mm whoop.
This new UART version brings a new AIO X12 ELRS Pro V1.1.
The built-in VTX and built-in UART ELRS receiver are controlled by the ESP32 chip.
Now you have a free set of UART and you will be able to flash single ExpressLRS firmware for this Mobula8.
Specifica..
131.90€
Ex Tax:108.11€
Model: 01010039
Defy gravity and embark on an unforgettable journey with the Air65!
More impressive and more efficient than the Meteor series, this 65mm whoop weighs only 17g and is available in two versions.
The first is an Air65 with a propulsion system for Racing, it is equipped with 0702SE 27000KV motors and Ge..
120.90€
Ex Tax:99.10€
Model: 01010038_2
Defy gravity and embark on an unforgettable journey with the Air75!
More impressive and more efficient than the Meteor series, this 75mm whoop weighs only 21g.
The Air75 has the first AIO using the G473 processor. It seamlessly integrates FC, ESC, OSD and VTX.
We recommend using a 1S 450mAh battery...
120.90€
Ex Tax:99.10€
Model: 0110003154
Replacement ExpressLRS 2.4G AIO for Tinyhawk III Plus.
Included
1x AIO
1x Power cable with capacitor
Voir plus..
69.90€
Ex Tax:57.30€
Model: AR0057769
Propeller guard for the DJI Neo drone.
Included
1x Propeller guard (left)
1x Propeller guard (right)
Voir plus..
8.90€
Ex Tax:7.30€
Model: AR0056588
The DJI Focus Pro motor is an essential accessory for the DJI RS 4 stabilizer.
It allows controlling the lens focus via the dial or adjusting the lens zoom via the joystick, this smooth operation allows effective lens control.
Specifications
Transmitter power:..
146.90€
Ex Tax:120.41€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Ex Tax:11.39€
Model: AR0056467
This 3.5mm TRS audio cable for DJI Mic 2 allows you to remove the receiver from your camera, while leaving it plugged in.
Included
1x Cable
Voir plus..
21.90€
Ex Tax:17.95€
Model: FW19002971
This DJI O3 Air Unit Connection Cable is designed to replace the easily damaged socket cable that connects the two circuit boards during the naked O3 assembly process.
This high quality cable guarantees a perfect fit and reliable connection between boards.
Made of premium quality materials, the cabl..
13.90€
Ex Tax:11.39€