![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
-两发一收含充电盒05-250x250w.jpg "DJI Mic 3 (2 TX + 1 RX + Charging Case)")
-两发一收含充电盒02-250x250w.jpg "DJI Mic 3 (2 TX + 1 RX + Charging Case)")
Brand: DJI
Model: DJI-MIC3
All-In-One, Ready To Go [1]Lightweight and compact, DJI Mic 3 supports both magnetic and clip-on use for flexible wearing. The charging case keeps transmitters, receiver, and accessories together for easy carrying and instant setup [1].4TX + 8RX Capability & Four-Channel Output [2]Use up to four..
309.90€
Ex Tax:254.02€
Model: DJI-M4-E
Intelligent Recognition With AI，Intelligent OperationBuilt-in AI identifies vehicles, vessels, and subjects during search and rescue or routine flights. Offers Cruise, FlyTo, Smart Track, and POI functions.Excellent for Low-Light EnvironmentsThe Matrice 4 series cameras have larger apertures, new Ni..
4,634.90€
Ex Tax:3,799.10€
Model: DJI-M4-T
Intelligent Recognition With AI，Intelligent OperationBuilt-in AI identifies vehicles, vessels, and subjects during search and rescue or routine flights. Offers Cruise, FlyTo, Smart Track, and POI functions.Excellent for Low-Light EnvironmentsThe Matrice 4 series cameras have larger apertures, new Ni..
6,952.90€
Ex Tax:5,699.10€
Model: DJI-M4-LNP
OverviewEach propeller blade has been put under precise dynamic balancing tests to output less noise. The new safety design causes less damage to people or objects in case of an accident.
Tips1. Mount the propellers strictly according to the user manual.2. Damaged propellers should be replaced a..
19.90€
Ex Tax:16.31€
Model: DTTCE70G1
This new ESC 2-8S from Sequre features an innovative design with oblique soldering PADS for better integration and easier soldering of motor wires.
Highlights
PWM frequency up to 128 KHz.
High-quality, high-power MOSFET
Optimized firmware for faster response.
Innovative design, oblique sol..
103.90€
Ex Tax:85.16€
Model: ES666
The Sequre ES666 screwdriver is the smart and innovative tool you"ve been missing. This multifunctional electric screwdriver supports sensing, fixed and automatic modes, which breaks traditional concepts.
The ES666 has many features such as angle detection, sensitivity adjustment, front-facing LEDs,..
53.90€
Ex Tax:44.18€
Model: KAYOUDUR-HARDWARE
Hardware set for the KAYOUDUR 5" from Kayou Frames.
Included
1x Hardware set
Voir plus..
8.90€
Ex Tax:7.30€
Model: VELOX-F7SEV50ASE
Special offer!
3 propeller sets free with the purchase of a promotional stack
1x F5146
1x P49436
1x T5146
While stocks last
This T-Motor 30.5*30.5mm stack consists of the F722 SE flight controller and the Velox V50A SE 4in1 BLHeli_32 ESC.
HD and analog compatible, this combo supports 8 motors an..
110.90€
Ex Tax:90.90€
Model: AXIS-C246-2050KV-MR30
"Fly to create" is the slogan representing the association of AxisFlying with the Escape FPV pilot through these new motors dedicated to cinematic flight, the C246.
Here is the 2050KV version with MR30 connectors, intended for the Argus Plug & Play stack (related accessorie), the stack requiring NO ..
26.90€
Ex Tax:22.05€
Model: 01130003_3
This set of 15 PEEK screws will allow you to reduce the weight of your whoop.
Stronger, stronger and more durable than nylon screws, these screws save up to 0.46g for construction using metal screws.
PEEK screws are therefore perfect for building 65/75mm whoops such as the Meteor.
Included
15x ..
8.90€
Ex Tax:7.30€
Model: AR0056622
Set of ND8, ND16 and nD32 filters for the DJI Avata 2 drone.
The ND filter will reduce the amount of light that enters the camera sensor.
Specifications
Weight : 0.7g / filter
Compatibiltity : DJI Avata 2 drone
Diameter : 26*24mm
Included
1x ND8 filter
1x ND16 filter
1x ND32 filter
Note ..
62.90€
Ex Tax:51.56€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Ex Tax:11.39€