![DJI Mini 3 Pro [image]](https://www.onedrone.com/store/image/cache/catalog/banners/dji_mini_3_pro_no_rc_-550x550w-200x120w.jpg)
-150x150h.jpg)
-1000x1000-150x150.jpg)
-150x150.png)
Search Criteria
Products meeting the search criteria
Model: POWER1000-BAG
Ideal for transporting, storing and protecting the DJI Power 1000.
The carrying bag has space for all the necessary cabling.
Equipped with air vents and zips, no need to take the DJI Power 100 out to use it!
Specifications
Dimensions: 452 x 240 x 232 mm (L x W x H)
Compatibility: DJI Power 10..
104.90€
Ex Tax:85.98€
Model: DJI-CARE-AVATA2-2A
DJI Care Refresh provides up to 3 replacements over 2 years per for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first rep..
104.90€
Ex Tax:85.98€
Model: AR0056619
Increase the flight time of your DJI Avata 2 with this smart Li-Ion battery.
Enjoy a battery life of approximately 23 minutes thanks to the voltage of 14.76V and the capacity of 2150mAh.
4 LEDs and a button will allow you to know the battery charge status.
Specifications
Type: Li-Ion
Voltage: 1..
126.90€
Ex Tax:104.02€
Model: AR0056876
This adapter was designed by DJI to be able to connect the DJI Mic 2 to Sony cameras without using a 3.5mm TRS cable.
Its design allows it to be installed in the shoe of the Sony device where you can attach the DJI Mic 2 receiver.
As a result, the latter will be connected to the adapter interface an..
37.90€
Ex Tax:31.07€
Model: AR0056593
This quick release plate from DJI allows you to quickly and easily install your camera on DJI RS stabilizers.
This 2024 version brings an adjustable placement guide that fits below the camera to serve as a stop.
This mount is compatible with DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro and RS 2 stabilizers.
..
13.90€
Ex Tax:11.39€
Model: AR0056467
This 3.5mm TRS audio cable for DJI Mic 2 allows you to remove the receiver from your camera, while leaving it plugged in.
Included
1x Cable
Voir plus..
21.90€
Ex Tax:17.95€
Model: HEATSINK-O3-NINJA
This heatsink is for the DJI O3 Air Unit.
It enables improved cooling performance for the high power consumption of O3.
Included
1x Heatsink
4x Screw
1x Thermal grease
Note : DJI O3 VTX not included
Voir plus..
5.90€
Ex Tax:4.84€
Model: AR0056592
The DJI BG70 grip is the accessory you need if you want more autonomy on your DJI RS stabilizer.
In addition to recharging in just 2.5 hours, the BG70 supports 18W fast charging and offers an impressive battery life of 29 hours for the DJI RS 4 and 29.5 hours for the DJI RS 4 Pro.
This simple to in..
156.90€
Ex Tax:128.61€
Model: DJI-CARE-AVATA2-1
DJI Care Refresh provides two replacement units per year for a small additional charge and covers a wide variety of accidents, providing greater peace of mind.
In exchange for an additional cost, you will have the possibility of having access to 2 replacement units over a year. The first replacemen..
63.90€
Ex Tax:52.38€
Model: AR0056589
The DJI Focus Pro LiDAR module achieves autofocus when paired with a DJI Focus Pro motor.
The LiDAR has a detection range of 20 meters, an ultra-wide vision of 70° and will detect 76,800 measurement points, thus refining the detection of the contours of human subjects.
Its 30Hz refresh rate provides..
637.90€
Ex Tax:522.87€
Model: SP40
This carbon adapter for DJI O3 from RushFPV allows good cooling of the VTX by increasing the heat dissipation space.
The plate is mounted in 20x20mm (M2) or 25.5x25.5mm (M1.6).
Included
1x Plate
5x Screw
Voir plus..
4.90€
Ex Tax:4.02€
Model: PIRAT-MATEY2
The Lil"Matey2 is the new 3.5 inches precious of PiratFrames.
Now compatible with digital VTX, it has reinforced arms, aluminum camera cage...
Specifications
Weigth : 65g
up to 3.5 inches
20x20 stack
DJI O3, walksnail, Vista ready (20x20)
Independent arms (9/12mm motors - from 1407 to 1804)
..
51.90€
Ex Tax:42.54€